Profesyonel Ağ Ürünleri arşivleri - Kurumsal E-Mağaza - Business Tech Bilişim Hizmetleri

Cisco CW9176I-RTG Cisco Wireless 9176I(Wi-Fi 7, 3 radio, 3 band 4×4, UWB),Global

store-secure — Sat, 11 Jul 2026 11:39:39 +0000

Product specifications

Table 2. Product specifications

Item	Specification
Part numbers	Cisco Wireless 9176 Access Points: Internal antennas ● CW9176I: Indoor access point with omnidirectional antenna ● CW9176D1: Indoor access point with directional antenna
Software	Cisco Wireless 9176 Series ● Cisco IOS ^® XE Software Release 17.15.2 or later
Supported wireless LAN controllers	● Catalyst 9800 Series Wireless Controllers (physical or virtual) ● Cisco Catalyst 9000 switches with Embedded Wireless Controller in SDA mode
802.11be	● 4×4 uplink/downlink MU-MIMO with four spatial streams (2.4/5 GHz(XOR), 5 GHz, and 6 GHz) ● 4096 QAM ● Multilink operation ● Preamble puncturing ● Uplink/downlink OFDMA ● TWT ● BSS coloring ● Maximal Ratio Combining (MRC) ● 20-, 40-, 80-, 160-, and 320-MHz channels (6 GHz) ● 20-, 40-, 80-, and 160-MHz channels (5 GHz) ● 20-MHz channels (2.4 GHz) ● PHY data rates up to 18 Gbps (4×4 320 MHz on 6 GHz, 4×4 160 MHz on 5 GHz, and 4×4 20 MHz on 2.4 GHz) or PHY data rates up to 23 Gbps (4×4 320 MHz on 6 GHz, 4×4 160 MHz on 5 GHz and 4×4 160 MHz on 5 GHz) ● Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive) ● 802.11 Dynamic Frequency Selection (DFS) ● Cyclic Shift Diversity (CSD) support ● Wi-Fi Protected Access 3 (WPA3) support
802.11ax	● 4×4 uplink/downlink MU-MIMO with four spatial streams each (2.4/5 GHz, 5 GHz, and 6 GHz) ● Uplink/downlink OFDMA ● 1024 QAM ● TWT ● BSS coloring ● MRC ● 802.11ax beamforming ● 20-, 40-, 80-, and 160-MHz channels (5 and 6-GHz) ● 20-MHz channels (2.4-GHz) ● PHY data rates up to 10.1 Gbps (4×4 160 MHz on 6 GHz, 4×4 160 MHz on 5 GHz, and 4×4 20 MHz on 2.4 GHz) or PHY data rates up to 14.4 Gbps (4×4 160 MHz on 6 GHz, 4×4 160 MHz on 5 GHz, and 4×4 160 MHz on 5 GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● 802.11 DFS ● CSD support ● WPA2/WPA3 support
802.11ac	● 4×4 + 4×4 downlink MU-MIMO with 4×4 spatial streams ● MRC ● 802.11ac beamforming ● 20-, 40-, 80-, and 160-MHz channels ● PHY data rates up to 3.4 Gbps (dual 4×4 160 MHz on 5 GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● 802.11 DFS ● CSD support ● WPA2/WPA3 support
802.11n version 2.0 (and related) capabilities	● 4×4 MIMO with four spatial streams ● MRC ● 802.11n and 802.11a/g beamforming ● 20- and 40-MHz channels ● PHY data rates up to 1.5 Gbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● 802.11 DFS ● CSD support
Integrated antenna	Cisco Wireless 9176I ● 2.4 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth ● 5 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth ● 6 GHz: Peak gain 6 dBi, internal antenna, omnidirectional in azimuth ● IoT: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth ● UWB: Peak gain 7 dBi, internal antenna, omnidirectional in azimuth ● GNSS: (L1) Peak gain 3 dBi, (L5) Peak gain 3 dBi, internal antenna, omnidirectional in azimuth Cisco Wireless 9176D1 ● 2.4 GHz: Peak gain 7 dBi, internal antenna, directional in azimuth (80 x 80 beam width) ● 5 GHz: Peak gain 8 dBi, internal antenna, directional in azimuth (70 x 70 beam width) ● 6 GHz: Peak gain 8 dBi, internal antenna, directional in azimuth (70 x 70 beam width) ● IoT: Peak gain 7 dBi, internal antenna, omnidirectional in azimuth (70 x 70 beam width) ● UWB: Peak gain 10 dBi, internal antenna, omnidirectional in azimuth ● GNSS: (L1) Peak gain 2 dBi, (L5) Peak gain 5 dBi, internal antenna, omnidirectional in azimuth
Interfaces	● 1x 100M/1000M/2.5G/5G/10G Multigigabit Ethernet (RJ-45) ● Management console port (RJ-45) with default speed of 115200 bps ● USB 2.0 at 9W
Incorporated radios	● Three built in radios including GPS/GNSS, dedicated IoT radio, and Ultra Wide Band radio
Indicators	● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
Dimensions (W x L x H)	● 9176I access point (without mounting brackets): ◦ 9.5 x 9.5 x 2.0 in. (24 x 24 x 5.1 cm) ● 9176D1 access point (without mounting brackets): ◦ 9.5 x 9.5 x 2.0 in. (24 x 25 x 5.1 cm)
Weight	Cisco Wireless 9176I ● 3.4 lb. (1.56 kg) Cisco Wireless 9176D1 ● 3.4 lb. (1.56 kg)
Input power requirements	● 802.3bt Cisco Universal PoE (Cisco UPOE ^®), 802.3at Power over Ethernet Plus (PoE+), 802.3af PoE (only for configuration staging, all radios off) ● (Or) Cisco power injector CW-INJ-8
	Cisco Wireless 9176I
	Power source		2.4-GHz radio		5-GHz radio				6-GHz radio		Link speed				USB		Max PoE power consumption
	802.3bt (Class 5) (UPOE)		4×4		4×4				4×4		1 x 10G				Y (9W)		39W
	802.3at (PoE+)		2×2		4×4				4×4		1x 2.5G				N		25.5W
	802.3af (PoE)		–		–				–		1x 1G				N		13.95W
	Note: Actual power consumption may vary depending on access point usage. It is recommended that you ensure that Link Layer Discovery Protocol (LLDP)/Cisco Discovery Protocol is enabled to allow proper power negotiation.
	Cisco Wireless 9176D1
	Power source	2.4-GHz radio		5-GHz radio				6-GHz radio				Link speed		USB		Max PoE power consumption
	802.3bt (Class 5) (UPOE)	4×4		4×4				4×4				1 x 10G		Y (9W)		39W
	802.3at (PoE+)	2×2		4×4				4×4				1x 2.5G		N		25.5W
	802.3af (PoE)	–		–				–				1x 1G		N		13.95W
	Note: Above power draw table starting with IOS-XE version 17.15.3
Power consumption	CW9176I
	Power Source						Idle						Typical
	802.3bt (UPOE)						15.5W ±2W						17.7W ±4W
	802.3at (PoE+)						15.4W ±2W						17.2W ±4W
	Note: Actual power consumption may vary depending on AP usage. Typical power consumption assumes AP is passing traffic^* during typical business hours, and is idle during off-business hours. Business hours are assumed to be 11 hours a day, 6 days a week. ^* Test Conditions: 802.3bt: The 6 GHz, 5 GHz band all operating at 160 MHz (4×4) passing 1 Gbps per band of download traffic and the 2.4 GHz band operating at 20 MHz (4×4) passing 150 Mbps of download traffic; USB disabled; 10G Ethernet Port; Ambient temperature 25˚C (77°F). 802.3at: The 6 GHz and the 5 GHz bands both operating at 160 MHz (2×2) passing 200 Mbps per band of download traffic and the 2.4 GHz band operating at 20 MHz (2×2) passing 50 Mbps of download traffic; USB disabled; 2.5G Ethernet Port; Ambient temperature 25˚C (77°F).
	CW9176D1
	Power Source						Idle						Typical
	802.3bt (UPOE)						15.5W ±2W						17.7W ±4W
	802.3at (PoE+)						15.4W ±2W						17.2W ±4W
	Note: Actual power consumption may vary depending on AP usage. Typical power consumption assumes AP is passing traffic^* during typical business hours, and is idle during off-business hours. Business hours are assumed to be 11 hours a day, 6 days a week. ^* Test Conditions: 802.3bt: The 6 GHz, 5 GHz band all operating at 160 MHz (4×4) passing 1 Gbps per band of download traffic and the 2.4 GHz band operating at 20 MHz (4×4) passing 150 Mbps of download traffic; USB disabled; 1x 10G Ethernet Ports; Ambient temperature 25˚C (77°F). 802.3at: The 6 GHz and the 5 GHz bands both operating at 160 MHz (2×2) passing 200 Mbps per band of download traffic and the 2.4 GHz band operating at 20 MHz (2×2) passing 50 Mbps of download traffic; USB disabled; 10G Ethernet Port; Ambient temperature 25˚C (77°F).
Environmental	Cisco Wireless 9176I ● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) ● Nonoperating (storage) altitude test: 25°C (77°F) at 15,000 ft (4570 m) ● Operating temperature: 32° to 122°F (0° to 50°C) ● Operating humidity: 10% to 90% (noncondensing) ● Operating altitude test: 40°C (104°F) at 9843 ft (3000 m) Cisco Wireless 9176D1 ● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) ● Nonoperating (storage) altitude test: 25°C (77°F) at 15,000 ft (4570 m) ● Operating temperature: 32° to 122°F (0° to 50°C) ● Operating humidity: 10% to 90% (noncondensing) ● Operating altitude test: 40°C (104°F) at 9843 ft (3000 m)
Available transmit power settings	Cisco Wireless 9176I
	2.4 GHz ● 23 dBm (200 mW) ● -4 dBm (0.39 mW)					5 GHz ● 23 dBm (200 mW) ● -4 dBm (0.39 mW)						6 GHz ● 23 dBm (200 mW) ● -4 dBm (0.39 mW) Note: In countries where use of the 6-GHz band is not allowed or there is no current software support, the 6-GHz radio will be disabled. The radio may be enabled with future software, once the product is certified to operate in 6 GHz for that country.
	Cisco Wireless 9176D1
	2.4 GHz ● 23 dBm (200 mW) ● -4 dBm (0.39 mW)					5 GHz ● 23 dBm (200 mW) ● -4 dBm (0.39 mW)						6 GHz ● 23 dBm (200 mW) ● -4 dBm (0.39 mW) Note: In countries where use of the 6-GHz band is not allowed or there is no current software support, the 6-GHz radio will be disabled. The radio may be enabled with future software, once the product is certified to operate in 6 GHz for that country.
Compliance standards	● Safety: ◦ IEC 60950-1 / IEC 62368-1 Ed.3 (with Ed.2 Deviation annex) ◦ EN 60950-1 / EN 62368-1 Ed.3 (with Ed.2 Deviation annex) ◦ UL 60950-1 / UL62368-1 3rd (with Ed.2 Deviation annex) ◦ CAN/CSA-C22.2 No. 60950-1 / CAN/CSA-C22.2 No. 62368-1 3rd (with Ed.2 Deviation annex) ◦ AS/NZS60950.1 / AS/NZS62368.1 Ed.3 (with Ed.2 Deviation annex) ◦ UL 2043 ◦ Class III equipment ● Emissions: ◦ CISPR 32 (rev. 2015) +AMD1:2019 ◦ EN 55032:2015/A11:2020 ◦ EN IEC 61000-3-2:2019/A1:2021 ◦ EN 61000-3-3:2013+A1:2019 ◦ AS/NZS CISPR32: 2015+AMD1:2020 ◦ 47 CFR FCC Part 15B ◦ ICES-003 (Issue 7, Class B) ◦ VCCI-CISPR 32:2016 ◦ CNS 13438:2006 (95) ◦ KS C 9832:2019 ◦ QCVN 118:2018/BTTTT ● Immunity: ◦ EN 55035:2017+A11:2020 ◦ KS C 9835:2019 ● Emissions and immunity: ◦ EN 301 489-1 V2.2.3 (2019-11) ◦ EN 301 489-17 V3.2.4 (2020-09) ◦ QCVN (18:2014) ◦ QCVN 112:2017/BTTTT ◦ KS X 3124:2020 ◦ KS X 3126:2020 ◦ EN 61000-6-1:2019 ◦ EN 60601-1-2:2015+A1:2021									● Radio: ◦ EN 300 328 (v2.2.2) ◦ EN 301 893 (v2.1.1) ◦ EN 303 687 (v0.0.14, draft) ◦ AS/NZS 4268 (rev. 2017) ◦ 47 CFR FCC Part 15C, 15.247, 15.407 ◦ RSP-100 ◦ RSS-GEN ◦ RSS-247 ◦ LP0002 (109) ◦ Japan Std. 66, and Std. 71 ● RF safety: ◦ EN 50385:2017 ◦ AS/NZS 2772 (rev. 2016) ◦ 47 CFR Part 2.1091 ◦ RSS-102 ◦ IEEE standards: ◦ IEEE 802.3 ◦ IEEE 802.3ab ◦ IEEE 802.3af/at ◦ IEEE 802.11a/b/g/n/ac/ax/be ◦ IEEE 802.11h, 802.11d ● Security: ◦ 802.11i (WPA2, WPA3) ◦ 802.1x/802.1x – SHA256 ◦ Enhanced Open/OWE ◦ Advanced Encryption Standard (AES) – GCMP128, GCMP256 and CCMP256 ● Extensible Authentication Protocol (EAP) types: ◦ EAP-Transport Layer Security (TLS) ◦ EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol (MSCHAP) v2 ◦ Protected EAP (PEAP) v0 or EAP-MSCHAP v2 ◦ EAP-Flexible Authentication via Secure Tunneling (EAP-FAST) ◦ PEAP v1 or EAP-Generic Token Card (GTC) ◦ EAP-Subscriber Identity Module (SIM)
Certifications	● Wi-Fi Alliance: Wi-Fi 7 (R1), Wi-Fi 6 (R2), Wi-Fi 6E, WPA3-R3, WPA3-Suite B, Enhanced Open Security ● Bluetooth SIG: Bluetooth Low Energy

The post Cisco CW9176I-RTG Cisco Wireless 9176I(Wi-Fi 7, 3 radio, 3 band 4×4, UWB),Global appeared first on Kurumsal E-Mağaza - Business Tech Bilişim Hizmetleri.

Cisco CW9178I-RTG Cisco Wireless 9178I(Wi-Fi 7, 4 radio, 3 band 4×4, UWB),Global

store-secure — Sat, 11 Jul 2026 11:39:39 +0000

Product specifications

Table 2. Product specifications

Item	Specification
Part numbers	Cisco Wireless 9178I Access Point: Internal antennas ● CW9178I
Software	Cisco Wireless 9178I ● Cisco IOS ^® XE Software Release 17.15.2 or later
Supported wireless LAN controllers	● Catalyst 9800 Series Wireless Controllers (physical or virtual) ● Cisco Catalyst 9000 switches with Embedded Wireless Controller in SDA mode
802.11be	● 4×4 + 4×4 uplink/downlink MU-MIMO with 4 spatial streams each (5 GHz) ● 4×4 uplink/downlink MU-MIMO with four spatial streams (2.4 and 6 GHz) ● 4096 QAM ● Multilink operation ● Preamble puncturing ● Uplink/downlink OFDMA ● TWT ● BSS coloring ● Maximal Ratio Combining (MRC) ● 20-, 40-, 80-, 160- and 320-MHz channels (6 GHz) ● 20-, 40-, 80-, and 160-MHz channels (5 GHz) ● 20-MHz channels (2.4 GHz) ● PHY data rates: in Quad radio mode, up to 24 Gbps (4×4 320 MHz on 6 GHz, 4×4 + 4×4 160 MHz on 5 GHz, and 4×4 20 MHz on 2.4 GHz); in Tri radio mode, up to 18 Gbps (4×4 320 MHz on 6 GHz, 4×4 160 MHz on 5 GHz, and 4×4 20 MHz on 2.4 GHz) or PHY data rates up to 23 Gbps (4×4 320 MHz on 6 GHz, 4×4 160 MHz on 5 GHz and 4×4 160 MHz on 5 GHz) ● Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive) ● 802.11 Dynamic Frequency Selection (DFS) ● Cyclic Shift Diversity (CSD) support ● Wi-Fi Protected Access 3 (WPA3) support
802.11ax	● 4×4 + 4×4 uplink/downlink MU-MIMO with four spatial streams each (5 GHz) ● 4×4 uplink/downlink MU-MIMO with four spatial streams (2.4 and 6 GHz) ● Uplink/downlink OFDMA ● 1024 QAM ● TWT ● BSS coloring ● MRC ● 802.11ax beamforming ● 20-, 40-, 80-, and 160-MHz channels (5 and 6 GHz) ● 20-MHz channels (2.4 GHz) ● PHY data rates up to 10.2 Gbps (4×4 160 MHz on 6 GHz, 4×4 + 4×4 80 MHz on 5 GHz, and 4×4 20 MHz on 2.4 GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● 802.11 DFS ● CSD support ● WPA2/WPA3 support
802.11ac	● 4×4 + 4×4 downlink MU-MIMO with 4×4 spatial streams ● MRC ● 802.11ac beamforming ● 20-, 40-, 80-, and 160-MHz channels ● PHY data rates up to 3.4 Gbps (dual 4×4 160 MHz on 5 GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● 802.11 DFS ● CSD support ● WPA2/WPA3 support
802.11n version 2.0 (and related) capabilities	● 4×4 MIMO with four spatial streams ● MRC ● 802.11n and 802.11a/g beamforming ● 20- and 40-MHz channels ● PHY data rates up to 1.5 Gbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● 802.11 DFS ● CSD support
Integrated antenna	● 2.4 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth ● 5 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth ● 6 GHz: Peak gain 6 dBi, internal antenna, omnidirectional in azimuth ● IoT: Peak gain 3 dBi, internal antenna, omnidirectional in azimuth ● UWB: Peak gain 7 dBi, internal antenna, omnidirectional in azimuth ● GNSS: (L1) Peak gain 5 dBi, (L5) Peak gain 2 dBi, internal antenna, omnidirectional in azimuth
Interfaces	● 2x 100M/1000M/2.5G/5G/10G Multigigabit Ethernet (RJ-45) ● Management console port (RJ-45) with default speed of 115200 bps ● USB 2.0 at 9W
Indicators	● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
Dimensions (W x L x H)	● Access point (without mounting brackets): ◦ 9.9 x 9.9 x 2.0 in. (25.1 x 25.1 x 5.1 cm)
Weight	4.1 lb. (1.87 kg)
Input power requirements	● 802.3bt Cisco Universal PoE (Cisco UPOE ^®), 802.3at Power over Ethernet Plus (PoE+), 802.3af PoE (only for configuring staging, all radios off) ● (Or) Cisco Power Injector – CW-INJ-8
	Power Source	2.4-GHz radio	5-GHz radio		6-GHz radio		Link speed		USB	Max PoE power consumption
	802.3bt (Class 6) (UPOE)	4×4	4×4(LB) + 4×4(HB)		4×4		2x 10G		Y (9W)	47W
	802.3at (PoE+) (Quad Radio mode)	2×2	2×2 (LB) + 2×2 (HB)		2×2		2x 2.5 G		N	25.5W
	802.3at (POE+) (Tri Radio Mode)	2×2	4×4 (FB)		2×2		2x 1G		N	25.5W
	802.3af (PoE)	–	–		–		1x 1G		N	13.95W
	Note: Actual power consumption may vary depending on access point usage. It is recommended that you ensure that Link Layer Discovery Protocol (LLDP)/Cisco Discovery Protocol is enabled to allow proper power negotiation. Note: FB is Full Band, LB is Lower UNII Bands (UNII 1 and 2) and HB is Higher UNII Bands (UNII 2E and 3). Note: Above power draw table starting with IOS-XE version 17.15.3.
Power consumption	Power Source			Idle				Typical
	802.3bt (UPOE)			20.7W ±2W				25.7W ±4W
	802.3at (PoE+)			14.5W ±2W				16.8W ±4W
	Note: Actual power consumption may vary depending on AP usage. Typical power consumption assumes AP is passing traffic^* during typical business hours, and is idle during off-business hours. Business hours are assumed to be 11 hours a day, 6 days a week. ^* Test Conditions: 802.3bt: The 6 GHz, 5 GHz high-band and 5 GHz low-band all operating at 160 MHz (4×4) passing 1 Gbps per band of download traffic and the 2.4 GHz band operating at 20 MHz (4×4) passing 150 Mbps of download traffic; USB disabled; 2x 10G Ethernet Ports; Ambient temperature 25˚C (77°F). 802.3at: The 6 GHz and the 5 GHz bands both operating at 160 MHz (2×2) passing 1 Gbps per band of download traffic and the 2.4 GHz band operating at 20 MHz (2×2) passing 150 Mbps of download traffic; USB disabled; 1x 10G Ethernet Port; Ambient temperature 25˚C (77°F).
Environmental	● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) ● Nonoperating (storage) altitude test: 25˚C (77°F) at 15,000 ft (4570 m) ● Operating temperature: 32° to 122°F (0° to 50°C) ● Operating humidity: 10% to 90% (noncondensing) ● Operating altitude test: 40˚C (104°F) at 9843 ft (3000 m) Note: When the ambient operating temperature exceeds 40˚C (104˚F), the access point will shift from 4×4 to 2×2 on the 2.4-GHz, 5-GHz and 6-GHz radio(s); however, the USB interface will remain enabled.
Available transmit power settings	2.4 GHz ● 23 dBm (200 mW) ● -4 dBm (0.39 mW)			5 GHz ● 23 dBm (200 mW) ● -4 dBm (0.39 mW)				6 GHz ● 23 dBm (200 mW) ● -4 dBm (0.39 mW) Note: In countries where use of the 6-GHz band is not allowed or there is no current software support, the 6-GHz radio will be disabled. The radio may be enabled with future software, once the product is certified to operate in 6 GHz for that country.
Compliance standards	● Safety: ◦ IEC 60950-1 / IEC 62368-1 Ed.3 (with Ed.2 Deviation annex) ◦ EN 60950-1 / EN 62368-1 Ed.3 (with Ed.2 Deviation annex) ◦ UL 60950-1 / UL62368-1 3rd (with Ed.2 Deviation annex) ◦ CAN/CSA-C22.2 No. 60950-1 / CAN/CSA-C22.2 No. 62368-1 3rd (with Ed.2 Deviation annex) ◦ AS/NZS60950.1 / AS/NZS62368.1 Ed.3 (with Ed.2 Deviation annex) ◦ UL 2043 ◦ Class III equipment ● Emissions: ◦ CISPR 32 (rev. 2015) +AMD1:2019 ◦ EN 55032:2015/A11:2020 ◦ EN IEC 61000-3-2:2019/A1:2021 ◦ EN 61000-3-3:2013+A1:2019 ◦ AS/NZS CISPR32: 2015+AMD1:2020 ◦ 47 CFR FCC Part 15B ◦ ICES-003 (Issue 7, Class B) ◦ VCCI-CISPR 32:2016 ◦ CNS 13438:2006 (95) ◦ KS C 9832:2019 ◦ QCVN 118:2018/BTTTT ● Immunity: ◦ EN 55035:2017+A11:2020 ◦ KS C 9835:2019 ● Emissions and immunity: ◦ EN 301 489-1 V2.2.3 (2019-11) ◦ EN 301 489-17 V3.2.4 (2020-09) ◦ QCVN (18:2014) ◦ QCVN 112:2017/BTTTT ◦ KS X 3124:2020 ◦ KS X 3126:2020 ◦ EN 61000-6-1:2019 ◦ EN 60601-1-2:2015+A1:2021					● Radio: ◦ EN 300 328 (v2.2.2) ◦ EN 301 893 (v2.1.1) ◦ EN 303 687 (v0.0.14, draft) ◦ AS/NZS 4268 (rev. 2017) ◦ 47 CFR FCC Part 15C, 15.247, 15.407 ◦ RSP-100 ◦ RSS-GEN ◦ RSS-247 ◦ LP0002 (109) ◦ Japan Std. 66, and Std. 71 ● RF safety: ◦ EN 50385:2017 ◦ AS/NZS 2772 (rev. 2016) ◦ 47 CFR Part 2.1091 ◦ RSS-102 ● IEEE standards: ◦ IEEE 802.3 ◦ IEEE 802.3ab ◦ IEEE 802.3af/at ◦ IEEE 802.11a/b/g/n/ac/ax/be ◦ IEEE 802.11h, 802.11d ● Security: ◦ 802.11i (WPA2, WPA3) ◦ 802.1x/802.1x – SHA256 ◦ Enhanced Open/OWE ◦ Advanced Encryption Standard (AES) – GCMP128, GCMP256 and CCMP256 ● Extensible Authentication Protocol (EAP) types: ◦ EAP-Transport Layer Security (TLS) ◦ EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol (MSCHAP) v2 ◦ Protected EAP (PEAP) v0 or EAP-MSCHAP v2 ◦ EAP-Flexible Authentication via Secure Tunneling (EAP-FAST) ◦ PEAP v1 or EAP-Generic Token Card (GTC) ◦ EAP-Subscriber Identity Module (SIM)
Certifications	● Wi-Fi Alliance: Wi-Fi 7 (R1), Wi-Fi 6 (R2), Wi-Fi 6E, WPA3-R3, WPA3-Suite B, Enhanced Open Security ● Bluetooth SIG: Bluetooth Low Energy

The post Cisco CW9178I-RTG Cisco Wireless 9178I(Wi-Fi 7, 4 radio, 3 band 4×4, UWB),Global appeared first on Kurumsal E-Mağaza - Business Tech Bilişim Hizmetleri.

Cisco CW9172I-RTG Cisco Wireless 9172I(Wi-Fi 7, 3 radio, 3 band 2×2),Global

store-secure — Sat, 11 Jul 2026 11:39:39 +0000

Specifications

Category	Specifications
Radios	2.4 GHz 802.11b/g/n/ax/be client access radio 5 GHz 802.11a/n/ac/ax/be client access radio 6 GHz 802.11 ax/be client access radio Flexibility to operate in Tri-band 2.4, 5, 6 GHz in 2×2:2 or Dual-band 2.4 GHz in 2×2:2 and 5 GHz in 4×4:4 2.4 GHz IoT Radio 2.4 GHz, 5 GHz, and 6 GHz tri-band Air Marshal WIDS/WIPS, spectrum analysis, & location analytics radio 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support Concurrent operation of all five radios. BLE Version 5.3, software upgradable to 6.0 in the future.
GPS	Supported via optional USB GPS/GNSS module (CW-ACC-GPS1=)
Antenna	2.4 GHz Peak Gain 4 dBi, Internal Antenna, Omnidirectional in azimuth 5 GHz Peak Gain 5 dBi, Internal Antenna, Omnidirectional in azimuth 6 GHz Peak Gain 6 dBi, Internal Antenna, Omnidirectional in azimuth
802.11ax, 802.11ac Wave 2 and 802.11n Capabilities	DL-OFDMA, UL-OFDMA, TWT support, BSS coloring 2×2 multiple input, multiple output (MIMO) with two spatial streams 2×2+4×4 SU-MIMO, UL MU-MIMO*, and DL MU-MIMO support Maximal ratio combining (MRC) & beamforming 20 and 40 MHz channels (802.11n); 20, 40, and 80 MHz channels (802.11ac Wave 2); 20, 40 and 80* MHz channels (802.11ax) Note: *40MHz and 80 MHz channels are supported only in the 5GHz and 6 GHz band. 802.11ax supported only in 6 GHz band.
802.11be Capabilities	Up to 4096-QAM on 2.4 GHz, 5 GHz and 6 GHz bands 20 MHz channels on 2.4 GHz bands 20, 40, 80, 160 MHz on 5 GHz bands 20, 40, 80, 160, 320 MHz on 6 GHz bands MLO (Multi-link operation) across different bands MRU (Multiple Resource Unit) allocation in OFDMA 4 x 4 multiple input, multiple output (MIMO) with four spatial streams
Power	Power over Ethernet: 42.5 – 57 V 802.3bt(Class 5)/802.3at/802.3af compliant Minimum power requirement : (PD: 12.95W min 802.3af) Maximum power requirement : (PD: 25.5W max 802.3at) Idle power consumption Dual radio mode: 10.3W +/- 2W Tri-radio mode: 10.7W +/- 2W Typical power consumption Dual radio mode: 11.2W +/- 4W Tri-radio mode: 12.2W +/- 4W Note: Actual power consumption may vary depending on AP usage. Typical power consumption assumes AP is passing traffic during typical business hours, and is idle during off-business hours. Business hours are assumed to be 11 hours a day, 6 days a week. Test Conditions: Dual Radio 802.3at: The 5 GHz band operating at 160 MHz (4×4) passing 400 Mbps per band of download traffic and the 2.4 GHz band operating at 20 MHz (2×2) passing 50 Mbps of download traffic; USB disabled; 2.5G Ethernet Port; Ambient temperature 25˚C (77°F). Tri Radio 802.3at: The 6 GHz and the 5 GHz bands both operating at 160 MHz (2×2) passing 200 Mbps per band of download traffic and the 2.4 GHz band operating at 20 MHz (2×2) passing 50 Mbps of download traffic; USB disabled; 2.5G Ethernet Port; Ambient temperature 25˚C (77°F). Power over Ethernet injector sold separately DC power: 54V (MA-PWR-50WAC sold separately)
Interfaces	1x 100/1,000/2.5 BASE-T Ethernet (RJ45) USB 2.0 at 4.5W DC power jack
Mounting	Desktop, ceiling, and wall mount capable AIR-AP-BRACKET-1 AIR-AP-BRACKET-2 Ceiling tile rail (9/16, 15/16 or 1 1⁄2” flush or recessed rails), assorted cable junction boxes AIR-AP-T-RAIL-R AIR-AP-T-RAIL-F
Physical Security	Kensington lock slot
Environment	Nonoperating (storage) temperature: -40° to 158°F (-40° to 70°C) Nonoperating (storage) altitude test: 25°C (77°F) at 16,000 ft (4863 m) Operating temperature: 32° to 122°F (0° to 50°C) 40-50C derated Operating humidity: 10% to 95% (noncondensing) Operating altitude test: 45° C (113° F) at 4205m (13.8K ft) Humidity:10% to 90% non-condensing
Reliability	Mean time between failure (MTBF): 842,342 hrs at 25°C operating temperature Mean time between failure (MTBF): 349,710 hrs at 50°C operating temperature
Physical Dimensions	CW9172I 7.8 x 7.8 x 2.1 in. (20 x 20 x 5.3 cm) Weight: 1.9 lb. (874 g)
Security	Integrated layer 7 firewall with mobile device policy management Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal Flexible guest access with device isolation VLAN tagging (802.1q) and tunneling with IPsec VPN PCI compliance reporting WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 – Personal, WPA3 – Enterprise, WPA3 – Enhanced Open (OWE)*** EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM TKIP, AES encryption Enterprise mobility management (EMM) and Mobile device management (MDM) integration Cisco ISE integration for guest access and BYOD posturing
Quality of Service	Advanced power save (U-APSD) WMM access categories with DSCP and 802.1p support Layer 7 application traffic identification and shaping
Mobility	PMK, OKC, and 802.11r for fast layer 2 roaming Distributed or centralized layer 3 roaming
Analytics	Embedded location analytics reporting and device tracking Global layer 7 traffic analytics reporting per network, per device, and per application
LED Indicators	1 power/booting/firmware upgrade status Ethernet LED
Regulatory	RoHS For additional country-specific regulatory information, please contact Meraki sales
Warranty	Indoor access point Lifetime hardware warranty with advanced replacement included
Ordering Information	CW9172I Cloud Managed Omnidirectional 802.11be Compatible AP MA-PWR-50WAC: Meraki AC Adapter for MR Series (power cable sold separately) CW-INJ-8: Multigigabit 802.3bt Power over Ethernet Injector (power cable sold separately) MA-INJ-6: Meraki Multigigabit 802.3bt Power over Ethernet Injector (power cable sold separately) Cisco AIR-PWRINJ-6 802.3at Cisco AIR-PWRINJ-7 802.3bt Power cord – MA-PWR-CORD-XX (XX Country Code) should be ordered separately for the AC adapter and Ethernet injector Note: Cisco Subscription or Meraki access point license required

Compliance and Standards

Category	Standard
IEEE Standards	802.3 ab/bz 802.3 af/at/bt 802.11a/b/g/n/ac/ax/be 802.11d/h/i/k/r/u/v/w
Certifications	● Wi-Fi Alliance: Wi-Fi 7 (R1), Wi-Fi 6 (R2), Wi-Fi 6E, WPA3-R3, WPA3-Suite B, Enhanced Open Security ● Bluetooth SIG: Bluetooth Low Energy
Safety Approvals	CSA and CB 60950 & 62368 EN 60601 certified Conforms to UL 2043 (Plenum Rating)
Radio Approvals	FCC Part 15C 15E RSS-247 (Canada) EN 300 328 ( v2.1.1) EN 301 893 (v2.1.1) AS/NZS 4268 (Australia/NZ) NOM-121 (Mexico) NCC LP0002 (Taiwan) For additional country-specific regulatory information, please contact Meraki sales
EMI Approvals (Class B)	FCC Part 15B ICES-003 (Canada) EN 301 489-1-17 EN 55032 EN 55024 (Europe) CISPR 32 (Australia/NZ) VCCI (Japan)
Exposure Approvals	FCC Part 2 RSS-102 (Canada) EN 50385 EN 6231 EN 62479 (Europe) AS/NZS 2772 (Australia/NZ)

The post Cisco CW9172I-RTG Cisco Wireless 9172I(Wi-Fi 7, 3 radio, 3 band 2×2),Global appeared first on Kurumsal E-Mağaza - Business Tech Bilişim Hizmetleri.

Cisco CW9174I-RTG Wireless 9174I (Wi-Fi 7, 3 radio, 3 band, 4×4) Global

store-secure — Sat, 11 Jul 2026 11:39:39 +0000

Licensing

Cisco Wi-Fi 7 access points, including the 9174 Series, require a Cisco Networking Subscription, either Cisco Wireless Essentials or Cisco Wireless Advantage licenses.

For information about licensing features and support, refer to the Cisco Networking Subscription data sheet.

Product specifications

Table 3. Specifications

Item	Specification
Part numbers	Cisco Wireless 9174 Series Access Points: ● CW9174I: Indoor access point with omnidirectional antenna ● CW9174E: Indoor access point with external antenna connector
Software	Cisco IOS^® XE Software Release 17.18.2 or later Cisco Meraki MR32.1.5 or later
Supported wireless LAN controllers	Catalyst and Cisco Wireless 9800 Series Wireless Controllers (physical or virtual) Catalyst 9000 switches with Embedded Wireless Controller in SD-Access mode
802.11be	4×4 uplink/downlink multiuser Multiple-Input Multiple Output (MU-MIMO) with four spatial streams (5 GHz, and 6 GHz), 2×2 with two spatial streams (2.4 GHz) (or) 4×4 uplink/downlink MU-MIMO with four spatial streams (2.4 GHz and 5 GHz) 4096 QAM Multilink operation Preamble puncturing Uplink/downlink OFDMA Target Wake Time (TWT) BSS coloring Maximal Ratio Combining (MRC) 20-, 40-, 80-, 160-, and 320-MHz channels (6 GHz) 20-, 40-, 80-, and 160-MHz channels (5 GHz) 20-MHz channels (2.4 GHz) PHY data rates up to ~17.5 Gbps (4×4 320 MHz on 6 GHz, 4×4 160 MHz on 5 GHz, and 2×2 20 MHz on 2.4 GHz) or PHY data rates up to ~6.5 Gbps (4×4 160 MHz on 5 GHz, 4×4 20 MHz on 2.4 GHz) Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive) 802.11 Dynamic Frequency Selection (DFS) Cyclic Shift Diversity (CSD) support Wi-Fi Protected Access 3 (WPA3) support
802.11ax	4×4 uplink/downlink MU-MIMO with four spatial streams (5 GHz, and 6 GHz), 2×2 with two spatial streams (2.4 GHz) (or) 4×4 uplink/downlink MU-MIMO with four spatial streams (2.4 GHz and 5 GHz) Uplink/downlink OFDMA 1024 QAM TWT BSS coloring MRC 802.11ax beamforming 20-, 40-, 80-, and 160-MHz channels (5 and 6-GHz) 20-MHz channels (2.4-GHz) PHY data rates up to ~10 Gbps (4×4 160 MHz on 6 GHz, 4×4 160 MHz on 5 GHz, and 2×2 20 MHz on 2.4 GHz) or PHY data rates up to 5.4 Gbps (4×4 160 MHz on 5 GHz, 4×4 20 MHz on 2.4 GHz) Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) 802.11 DFS CSD support WPA2/WPA3 support
802.11ac	● 4×4 downlink MU-MIMO with 4×4 spatial streams ● MRC ● 802.11ac beamforming ● 20-, 40-, 80-, and 160-MHz channels ● PHY data rates up to 1.7 Gbps (4×4 160 MHz on 5 GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● 802.11 DFS ● CSD support ● WPA2/WPA3 support
802.11n version 2.0 (and related) capabilities	● 4×4 MIMO with four spatial streams ● MRC ● 802.11n and 802.11a/g beamforming ● 20- and 40-MHz channels ● PHY data rates up to 1.5 Gbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● 802.11 DFS ● CSD support
Integrated antenna	Cisco Wireless 9174I ● 2.4 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth ● 5 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth ● 6 GHz: Peak gain 6 dBi, internal antenna, omnidirectional in azimuth ● IoT: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth
External Antenna	Cisco Wireless 9174E ● Omni-Directional Antenna (CW-ANT-T-O2-D8) ● 2.4 GHz: Peak gain 2 dBi, omnidirectional in azimuth ● 5 GHz: Peak gain 5 dBi, omnidirectional in azimuth ● 6 GHz: Peak gain 5 dBi, omnidirectional in azimuth ● IoT: Peak gain 2 dBi, omnidirectional in azimuth ● Directional Antenna (CW-ANT-T-D2-D8) ● 2.4 GHz: Peak gain 6.6 dBi, (75×75) directional ● 5 GHz: Peak gain 5.7 dBi, (75×75) directional ● 6 GHz: Peak gain 5.7 dBi, (75×75) directional ● IoT: Peak gain 6.0 dBi, (75×75) directional
Interfaces	● 1x 100M/1000M/2.5G/5G Multigigabit Ethernet (RJ-45) ● Management console port (RJ-45) with default speed of 115,200 bps ● USB 2.0 at 9W ● DC power jack, 54V, for use with MA-PWR-50WAC power adapter
Incorporated radios	● Dedicated IoT radio ● dedicated tri-band scanning radio
Indicators	● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
Dimensions (W x L x H)	● 9174I access point (without mounting brackets): ◦ 8.9 x 8.9 x 1.95 in. (22.6 x 22.6 x 4.9 cm) ● 9174E access point (without mounting brackets): ◦ 8.9 x 8.9 x 1.95 in. (22.6 x 22.6 x 4.9 cm)
Weight	Cisco Wireless 9174I ● 3.36 lb. (1.52 kg) Cisco Wireless 9174E ● 3.26 lb. (1.47 kg)
Input power	CW9174I
	Power source	2.4-GHz radio		5-GHz radio		6-GHz radio		Link speed	USB	Max PoE requirement at PD
	802.3bt (Class 5) (UPOE) or DC power	2×2		4×4		4×4		1x 5G	Y (9W)	37W
	802.3bt (Class 5) (UPOE) or DC power	4×4		4×4		–		1x 5G	Y (9W)	32W
	802.3at (PoE+)	2×2		4×4		4×4		1x 2.5G	Y (2.5W)	25.5W
	802.3at (PoE+)	4×4		4×4		–		1x 2.5G	Y (2.5W)	25.5W
	802.3af (PoE)	1×1		–		–		1x 1G	N	13.95W
	CW9174E
	Power source	2.4-GHz radio		5-GHz radio		6-GHz radio		Link speed	USB	Max PoE requirement at PD
	802.3bt (Class 5) (UPOE) or DC power	2×2		4×4		4×4		1x 5G	Y (9W)	37W
	802.3bt (Class 5) (UPOE) or DC power	4×4		4×4		–		1x 5G	Y (9W)	32W
	802.3at (PoE+)	2×2		4×4		4×4		1x 2.5G	Y (2.5W)	25.5W
	802.3at (PoE+)	4×4		4×4		–		1x 2.5G	Y (2.5W)	25.5W
	802.3af (PoE)	1×1		–		–		1x 1G	N	13.95W
Power consumption	CW9174I
	Power source		Idle				Typical
	802.3at (POE+)		12.4W ± 2W				15.9W
	Note: Actual power consumption may vary depending on access point usage. Typical power consumption assumes the access point is passing traffic* during typical business hours and is idle during off-business hours. Business hours are assumed to be 11 hours a day, 6 days a week. ^* Test conditions: (PoE): The 6-GHz and 5-GHz bands both operating at 160 MHz passing 200 Mbps per band of download traffic and the 2.4-GHz band operating at 20 MHz passing 50 Mbps of download traffic; USB disabled; 2.5G Ethernet port; ambient temperature 25˚C (77°F).
	CW9174E
	Power source		Idle				Typical
	802.3at (POE+)		12.6W				17.6W
	Note: Actual power consumption may vary depending on access point usage. Typical power consumption assumes the access point is passing traffic* during typical business hours and is idle during off-business hours. Business hours are assumed to be 11 hours a day, 6 days a week. ^* Test conditions: (PoE): The 6-GHz and 5-GHz bands both operating at 160 MHz passing 200 Mbps per band of download traffic and the 2.4-GHz band operating at 20 MHz passing 50 Mbps of download traffic; USB disabled; 2.5G Ethernet port; ambient temperature 25˚C (77°F).
Environmental	Cisco Wireless 9174I ● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) ● Nonoperating (storage) altitude test: 25°C (77°F) at 15,000 ft (4570 m) ● Operating temperature: 32° to 122°F (0° to 50°C) ● Operating humidity: 10% to 90% (noncondensing) ● Operating altitude test: 50°C (122°F) at 9843 ft (3000 m) Cisco Wireless 9174E ● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) ● Nonoperating (storage) altitude test: 25°C (77°F) at 15,000 ft (4570 m) ● Operating temperature: -4° to 122°F (-20° to 50°C) ● Operating humidity: 10% to 90% (noncondensing) ● Operating altitude test: 50°C (122°F) at 9843 ft (3000 m)
Available transmit power settings	Cisco Wireless 9174I
	2.4 GHz		5 GHz				6 GHz
	4×4: ● 23 dBm (200 mW) ● -4 dBm (0.39 mW) 2×2: ● 20 dBm (100 mW) ● -4 dBm (0.39 mW)		● 23 dBm (200 mW) ● -4 dBm (0.39 mW)				● 23 dBm (200 mW) ● -4 dBm (0.39 mW) Note: In countries where use of the 6-GHz band is not allowed or there is no current software support, the 6-GHz radio will be disabled. The radio may be enabled with future software once the product is certified to operate in 6 GHz for that country.
	Cisco Wireless 9174E
	2.4 GHz		5 GHz				6 GHz
	4×4: ● 23 dBm (200 mW) ● -4 dBm (0.39 mW) 2×2: ● 20 dBm (100 mW) ● -4 dBm (0.39 mW)		● 23 dBm (200 mW) ● -4 dBm (0.39 mW)				● 23 dBm (200 mW) ● -4 dBm (0.39 mW) Note: In countries where use of the 6-GHz band is not allowed or there is no current software support, the 6-GHz radio will be disabled. The radio may be enabled with future software once the product is certified to operate in 6 GHz for that country.
Compliance standards	● Safety: ◦ IEC 60950-1 / IEC 62368-1 Ed.3 (with Ed.2 Deviation annex) ◦ EN 60950-1 / EN 62368-1 Ed.3 (with Ed.2 Deviation annex) ◦ UL 60950-1 / UL62368-1 3rd (with Ed.2 Deviation annex) ◦ CAN/CSA-C22.2 No. 60950-1 / CAN/CSA-C22.2 No. 62368-1 3rd (with Ed.2 Deviation annex) ◦ AS/NZS60950.1 / AS/NZS62368.1 Ed.3 (with Ed.2 Deviation annex) ◦ UL 2043 ◦ Class III equipment ● Emissions: ◦ CISPR 32 (rev. 2015) +AMD1:2019 ◦ EN 55032:2015/A11:2020 ◦ EN IEC 61000-3-2:2019/A1:2021 ◦ EN 61000-3-3:2013+A1:2019 ◦ AS/NZS CISPR32: 2015+AMD1:2020 ◦ 47 CFR FCC Part 15B ◦ ICES-003 (Issue 7, Class B) ◦ VCCI-CISPR 32:2016 ◦ CNS 13438:2006 (95) ◦ KS C 9832:2019 ◦ QCVN 118:2018/BTTTT ● Immunity: ◦ EN 55035:2017+A11:2020 ◦ KS C 9835:2019 ● Emissions and immunity: ◦ EN 301 489-1 V2.2.3 (2019-11) ◦ EN 301 489-17 V3.2.4 (2020-09) ◦ QCVN (18:2014) ◦ QCVN 112:2017/BTTTT ◦ KS X 3124:2020 ◦ KS X 3126:2020 ◦ EN 61000-6-1:2019 ◦ EN 60601-1-2:2015+A1:2021				● Radio: ◦ EN 300 328 (v2.2.2) ◦ EN 301 893 (v2.1.1) ◦ EN 303 687 (v0.0.14, draft) ◦ AS/NZS 4268 (rev. 2017) ◦ 47 CFR FCC Part 15C, 15.247, 15.407 ◦ RSP-100 ◦ RSS-GEN ◦ RSS-247 ◦ LP0002 (109) ◦ Japan Std. 66, and Std. 71 ● RF safety: ◦ EN 50385:2017 ◦ AS/NZS 2772 (rev. 2016) ◦ 47 CFR Part 2.1091 ◦ RSS-102 ◦ IEEE standards: ◦ IEEE 802.3 ◦ IEEE 802.3ab ◦ IEEE 802.3af/at ◦ IEEE 802.11a/b/g/n/ac/ax/be ◦ IEEE 802.11h, 802.11d ● Security: ◦ 802.11i (WPA2, WPA3) ◦ 802.1x/802.1x – SHA256 ◦ Enhanced Open/OWE ◦ Advanced Encryption Standard (AES) – GCMP128, GCMP256 and CCMP256 ● Extensible Authentication Protocol (EAP) types: ◦ EAP-Transport Layer Security (TLS) ◦ EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol (MSCHAP) v2 ◦ Protected EAP (PEAP) v0 or EAP-MSCHAP v2 ◦ EAP-Flexible Authentication via Secure Tunneling (EAP-FAST) ◦ PEAP v1 or EAP-Generic Token Card (GTC) ◦ EAP-Subscriber Identity Module (SIM)
Certifications	● Wi-Fi Alliance: Wi-Fi 7 (R1), Wi-Fi 6 (R2), Wi-Fi 6E, WPA3-R3, WPA3-Suite B, Enhanced Open Security ● Bluetooth SIG: Bluetooth Low Energy

The post Cisco CW9174I-RTG Wireless 9174I (Wi-Fi 7, 3 radio, 3 band, 4×4) Global appeared first on Kurumsal E-Mağaza - Business Tech Bilişim Hizmetleri.

Cisco CW9177I Wireless 9177I (Wi-Fi 7, 3 radio, 3 band 4×4),Global

store-secure — Sat, 11 Jul 2026 11:39:39 +0000

Product specifications

Table 6. Product specifications

Item	Specification
Part numbers/ models	CW9177I CW9177D CW9177E
Software	Cisco IOS^® XE Software Release 26.1.x or later or Meraki MR32.2.x or later
Supported wireless LAN controllers	Catalyst 9800 Series Wireless Controllers (physical or virtual) Cisco Catalyst 9000 switches with Embedded Wireless Controller in SDA mode
802.11be	4×4 uplink/downlink MU-MIMO with four spatial streams each (2.4 GHz, 5 GHz, 6 GHz or 2.4 GHz, 5 GHz, 5 GHz) 4096 QAM Multilink operation Preamble puncturing Uplink/downlink OFDMA TWT BSS coloring Maximal Ratio Combining (MRC) 20-, 40-, 80-, 160- and 320-MHz channels (6 GHz) 20-, 40-, 80-, and 160-MHz channels (5 GHz) 20-MHz channels (2.4 GHz) PHY data rates: In tri-radio mode, up to 18 Gbps (4×4 320 MHz on 6 GHz, 4×4 160 MHz on 5 GHz, and 4×4 20 MHz on 2.4 GHz) or PHY data rates up to 12.2 Gbps (4×4 160 MHz on 5 GHz, 4×4 160 MHz on 5 GHz and 4×4 20 MHz on 2.4 GHz) Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive) 802.11 Dynamic Frequency Selection (DFS) Cyclic Shift Diversity (CSD) support Wi-Fi Protected Access 3 (WPA3) support
802.11ax	4×4 + 4×4 uplink/downlink MU-MIMO with four spatial streams each (2.4Ghz, 5 Ghz, 6GHz) Uplink/downlink OFDMA 1024 QAM TWT BSS coloring MRC 802.11ax beamforming 20, 40, 80, and 160 MHz channels (5 and 6 GHz) 20 MHz channels (2.4 GHz) PHY data rates up to 10.1 Gbps (4×4 160 MHz on 6 GHz, 4×4 160 MHz on 5 GHz, and 4×4 20 MHz on 2.4 GHz) or PHY data rates up to 10.1 Gbps (4×4 160 MHz on 5 GHz, 4×4 160 MHz on 5 GHz and 4×4 20 MHz on 2.4 GHz) Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) 802.11 DFS CSD support WPA2/WPA3 support
802.11ac	4×4 + 4×4 downlink MU-MIMO with 4×4 spatial streams MRC 802.11ac beamforming 20, 40, 80, and 160 MHz channels PHY data rates up to 3.4 Gbps (dual 4×4 160 MHz on 5 GHz) Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) 802.11 DFS CSD support WPA2/WPA3 support
802.11n version 2.0 (and related) capabilities	4×4 MIMO with four spatial streams MRC 802.11n and 802.11a/g beamforming 20- and 40-MHz channels PHY data rates up to 1.5 Gbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) 802.11 DFS CSD support
Integrated antenna	CW9177I
		2.4		5				6	IoT		GNSS
	Peak Gain	4 dBi		6 dBi				6 dBi	3 dBi		2 dBi
	CW9177D
		2.4		5				6	IoT		GNSS
	Peak Gain	8 dBi		6 dBi				8 dBi	3 dBi		2 dBi
	CW9177E
		2.4		5				6	IoT		GNSS
	CW-ANT-T-D4-N (Directional Antenna) Peak Gain	8.6 dBi		8.2 dBi				8.4 dBi	–		2 dBi
	CW-ANT-T-O3-N (Omni-directional Antenna) Peak Gain	5 dBi		6 dBi				5 dBi	–		2 dBi
Interfaces	1x 100M/1000M/2.5G/5G/10G Multigigabit Ethernet (RJ-45) 1x 1/10G Ethernet SFP/SFP+ Management console port (RJ-45)
LED Indicators	Front status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
Dimensions (W x L x H)	CW9177I, CW9177D, CW9177E (without mounting brackets): 352.2 mm x 270 mm x 76.2 mm (13.8 x 10.6 x 3 in.)
Weight	CW9177I and CW9177D Access point Weight: 4.11kg CW9177E Access point weight: 4.12kg
Input power requirements	802.3bt Cisco Universal PoE (Cisco UPOE^®), 802.3at Power over Ethernet Plus (PoE+), 802.3af PoE (only for configuring staging, all radios off) (Or) DC Power Adapter – #PID
	Power Source	2.4 GHz radio	5 GHz radio			6 GHz radio (XOR) 5 GHz radio	Link speed			Max PoE power consumption
	IEEE 802.3bt (Class 6) /UPoE+/PoE++	4×4	4×4 (FB)			4×4	2x 10G			45.1W
	IEEE 802.3bt (Class 6) /UPoE+/PoE++	4×4	4×4 (LB)			4×4 (HB) (5 GHz)	2×10 G			45.1 W
	802.3at (PoE+) (Tri-band)	2×2	2×2			2×2	1×2.5 G			30 W
	802.3at (POE+) (Dual band)	2×2	4×4			NA	1×2.5 G			30 W
	802.3af (PoE)	1×1	1×1			1×1	1x 1G			15.4
	Note: Actual power consumption may vary depending on access point usage. It is recommended that you ensure that Link Layer Discovery Protocol (LLDP)/Cisco Discovery Protocol is enabled to allow proper power negotiation. Note: FB is Full Band, LB is Lower UNII Bands (UNII 1 and 2) and HB is Higher UNII Bands (UNII 2E and 3).
Environmental	Nonoperating (storage) temperature: -40° to 158°F (-40° to 70°C) Nonoperating (storage) altitude test: 77°F (25˚C) at 17,000 ft (5182 m) Operating temperature: -40° to 149°F (-40° to 65°C) not including solar load. Operating temperature: -4° to 131°F (-40° to 55°C) including solar load. Operating humidity: 10% to 90% (noncondensing) Operating altitude test: 104°F (40˚C) at 9843 ft (3000 m) Foreign Body/Water Ingress: IEC60529 IP66/IP67 Wind resistance: up to 100 mph (161 km/h) sustained winds and 165 mph (266 km/h) wind gusts Icing protection: MIL-STD-810F (0.5 in. (13mm)) Corrosion: NEMA 250 (600 hrs. salt) Solar radiation: EN 60068-2-5 (753 W/m2)
Available transmit power settings	2.4 GHz 17 dBm (50 mW) -10 dBm (0.1mW) 5 GHz 17 dBm (50 mW) -10 dBm (0.1 mW) 6 GHz 17 dBm (50 mW) -10 dBm (0.1 mW) Note: In countries where use of the 6-GHz band is not allowed or there is no current software support, the 6-GHz radio will be disabled. The radio may be enabled with future software, once the product is certified to operate in 6 GHz for that country. Note: In some countries dual 5GHz operations are only possible if there is allowed use of UNII 1 and 2 outdoor.
Compliance standards	Safety: IEC 60950-1/IEC 62368-1 Ed.3 (with Ed.2 Deviation annex) EN 60950-1/EN 62368-1 Ed.3 (with Ed.2 Deviation annex) UL 60950-1/UL62368-1 3rd (with Ed.2 Deviation annex) CAN/CSA-C22.2 No. 60950-1/CAN/ CSA-C22.2 No. 62368-1 3rd (with Ed.2 Deviation annex) AS/NZS60950.1/AS/NZS62368.1 Ed.3 (with Ed.2 Deviation annex) UL 2043 Class III equipment Emissions: CISPR 32 (rev. 2015) +AMD1:2019 EN 55032:2015/A11:2020 EN IEC 61000-3-2:2019/A1:2021 EN 61000-3-3:2013+A1:2019 AS/NZS CISPR32: 2015+AMD1:2020 47 CFR FCC Part 15B ICES-003 (Issue 7, Class B) VCCI-CISPR 32:2016 CNS 13438:2006 (95) KS C 9832:2019 QCVN 118:2018/BTTTT Immunity: EN 55035:2017+A11:2020 KS C 9835:2019 Emissions and immunity: EN 301 489-1 V2.2.3 (2019-11) EN 301 489-17 V3.2.4 (2020-09) QCVN (18:2014) QCVN 112:2017/BTTTT KS X 3124:2020 KS X 3126:2020 EN 61000-6-1:2019 EN 60601-1-2:2015+A1:2021				Radio: EN 300 328 (v2.2.2) EN 301 893 (v2.1.1) EN 303 687 (v1.1.1) AS/NZS 4268 (rev. 2017) 47 CFR FCC Part 15C, 15.247, 15.407 RSP-100 RSS-GEN RSS-247 LP0002 (109) Japan Std. 66, and Std. 71 RF safety: EN 50385:2017 AS/NZS 2772 (rev. 2016) 47 CFR Part 2.1091 RSS-102 IEEE standards: IEEE 802.3 IEEE 802.3ab IEEE 802.3af/at IEEE 802.11a/b/g/n/ac/ax/be IEEE 802.11h, 802.11d Security: 802.11i (WPA2, WPA3) 802.1x/802.1x – SHA256 Enhanced Open/OWE Advanced Encryption Standard (AES) – GCMP128, GCMP256 and CCMP256 Extensible Authentication Protocol (EAP) types: EAP-Transport Layer Security (TLS) EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol (MSCHAP) v2 Protected EAP (PEAP) v0 or EAP-MSCHAP v2 EAP-Flexible Authentication via Secure Tunneling (EAP-FAST) PEAP v1 or EAP-Generic Token Card (GTC) EAP-Subscriber Identity Module (SIM)
Certifications	Wi-Fi Alliance: Wi-Fi 7, Wi-Fi 6E, Wi-Fi 6, WPA3-R3, WPA3-Suite B, Enhanced Open Security Bluetooth SIG: Bluetooth Low Energy

The post Cisco CW9177I Wireless 9177I (Wi-Fi 7, 3 radio, 3 band 4×4),Global appeared first on Kurumsal E-Mağaza - Business Tech Bilişim Hizmetleri.

Cisco C9124AXE-E Wi-Fi 6 Outdoor AP, External Ant, -E Regulatory Domain

store-secure — Sat, 11 Jul 2026 11:39:39 +0000

Product specifications

Table 2. Specifications

Item	Specification
Part numbers	Cisco Catalyst 9124AX Series Access Points: Outdoor environments ● C9124AXI-x: Cisco Catalyst 9124AX Series (internal omnidirectional antenna) ● C9124AXI-EWC-X: Cisco Catalyst 9124AX Series Access point with Embedded wireless controller (internal omnidirectional antenna) ● C9124AXD-x: Cisco Catalyst 9124AX Series (internal directional antenna) ● C9124AXD-EWC-X: Cisco Catalyst 9124AX Series Access point with Embedded wireless controller (internal directional antenna) ● C9124AXE-x: Cisco Catalyst 9124AX Series (External antenna) ● C9124AXE-EWC-X: Cisco Catalyst 9124AX Series Access point with Embedded wireless controller (External Antenna) Regulatory domains: (x = regulatory domain) Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance. Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List and/or regional price lists. Cisco Wireless LAN Services ● AS-WLAN-CNSLT: Cisco Wireless LAN Network Planning and Design Service ● AS-WLAN-CNSLT: Cisco Wireless LAN 802.11n Migration Service ● AS-WLAN-CNSLT: Cisco Wireless LAN Performance and Security Assessment Service
Software	Catalyst 9124AXI, 9124AXD ● Cisco IOS XE Software Release 17.5.1/17.3.4 (B Domain) or later ● Cisco IOS XE Software Release 17.6.2 or later (For all Regulatory Domains) Catalyst C9124AXE ● Cisco IOS XE Software Release 17.6.2 or later Catalyst C9124AXI/C9124AXD Embedded wireless Controller ● Cisco IOS XE Software Release 17.6.2 or later
Supported WLAN controllers	● Cisco Catalyst 9800 Series Wireless Controllers
802.11n version 2.0 (and related) capabilities	C9124AXI,C9124AXD ● 4×4:4 in both 2.4GHz and 5 GHz uplink/downlink MU-MIMO with four spatial streams C9124AXE ● 4×4:4 in 2.4GHz + two 2×2:2 radios in 5 GHz uplink/downlink MU-MIMO ● Maximal Ratio Combining (MRC) ● 802.11n and 802.11a/g ● 20- and 40-MHz channels ● PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) ● Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive) ● 802.11 Dynamic Frequency Selection (DFS) ● Cyclic Shift Diversity (CSD) support
802.11ac	C9124AXI,C9124AXD ● 4×4:4 in both 2.4GHz and 5 GHz uplink/downlink MU-MIMO with four spatial streams C9124AXE ● 4×4:4 in 2.4GHz + two 2×2:2 radios in 5 GHz uplink/downlink MU-MIMO ● MRC ● 802.11ac beamforming ● 20-, 40-, 80- and 80+80-MHz channels ● PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● 802.11 DFS ● CSD support ● WPA3 support
802.11ax	C9124AXI,C9124AXD ● 4×4:4 in both 2.4GHz and 5 GHz uplink/downlink MU-MIMO with four spatial streams C9124AXE ● 4×4:4 in 2.4GHz + two 2×2:2 radios in 5 GHz uplink/downlink MU-MIMO Uplink/downlink OFDMA ● TWT ● BSS coloring ● MRC ● 802.11ax beamforming ● 20-, 40-, 80-, and 80+80-MHz channels ● PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● 802.11 DFS ● CSD support ● WPA3 support ● WPA3-Enterprise 192 support
Integrated antenna	Catalyst 9124AXI ● 2.4 GHz: Peak gain 7 dBi, internal antenna, Vertical Polarization, omnidirectional ● 5 GHz: Peak gain 7 dBi, internal antenna, Vertical Polarization, omnidirectional ● BLE Antenna Gain: 5 dBi, internal antenna, Vertical Polarization, omnidirectional Catalyst 9124AXD ● 2.4 GHz: Peak gain 9 dBi, internal antenna, Dual Polarization, directional, Azimuth beamwidth 70 deg, elevation beamwidth 65 deg ● 5 GHz: Peak gain 9 dBi, internal antenna, Dual Polarization, directional, Azimuth beamwidth 55 deg, elevation beamwidth 50 deg ● BLE Antenna Gain: 4 dBi, internal antenna, Vertical Polarization, omnidirectional ● For more details, see Catalyst 9124AX Series Getting Started Guide.
External antenna	Catalyst 9124AXE ● The Catalyst 9124AXE Access Point is certified for use with antenna gains up to 13 dBi (2.4 GHz and 5GHz) ● Cisco offers the industry’s broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios. ● Supports Self-Identifiable Antennas (SIA) For more details, see Catalyst 9124AX Series Getting Started Guide.
Interfaces	Catalyst 9124AXI, 9124AXD, 9124AXE ● 1x 100/1000/2500 BASE-T (Ethernet) uplink interface ● 1x Gigabit Ethernet SFP ● Supports PoE output (802.3af compliant PSE) on the 1x 10/100/1000 BASE-T (Ethernet) downlink interface if C9124AX powered from one of the following: ◦ UPOE or 802.3bt inline power source (Switch or Power Injector) ◦ DC input (with external power supply rated ³ 60W) ● Management console port (RJ-45)
Indicators	● Status LED indicates boot loader status, association status, operating status, boot loader warnings
Dimensions (W x L x H)	● Access point (without mounting brackets): ◦ 9124AXI, 9124AXD, 9124AXE: 10.2 x 9.2 x 3.2 in. (25.9 x 23.3 x 8.1 cm)
Weight	9124AXI, 9124AXD ● 6.5 lb. (2.9 kg) 9124AXE ● 7 lb. (3.1 kg)
Input power requirements	● 802.3af Power over Ethernet (PoE), 802.3at PoE+, 802.3bt PoE++, Cisco Universal PoE (Cisco UPOE) ● Cisco power injector, AIR-PWRINJ-60RGD1= and AIR-PWRINJ-60RGD2= ● Cisco power injector, AIR-PWRINJ6= (Note: This injector supports 802.3at) ● DC power source: Auxiliary DC input, 24V to 56V
	PoE	Radio 0 SS	Radio 1 SS	Radio 2 SS (C9124AXE)		MGIG	SFP	1G	POE O/P
	.3af	Disabled	Disabled	n/a		1G	N	N	N
	.3at	2×2	2×2	n/a		1G	N	Y	N
	.3bt/UPOE/ DC	4×4	4×4 or 2X2	2×2		2.5G	Y	Y	Y
Environmental	Catalyst 9124AXI, 9124AXD, 9124AXE ● Nonoperating (storage) temperature: -40° to 185°F (-40° to 85°C) ● Nonoperating altitude test: 17,000 ft (5182 m) ● Operating temperature: -40° to 149°F (-40° to 65°C) with no solar loading, -40° to 131°F (-40° to 55°C) with solar loading ● Operating altitude test: 17,000 ft (5182 m) ● Operating humidity: 0% to 100% (condensing) ● IEC 60529 Ingress Rating: IP66/IP67 ● Wind resistance up to 100 mph (161 km/h) sustained winds and 165 mph (266 km/h) wind gusts ● Icing protection: MIL-STD-810F,13mm 13mm (0.5 in.) ● Corrosion: NEMA 250-2008 (600 hrs. salt, 1200 hrs. mixed gas) ● Solar radiation: EN 60068-2-5 (1120 W/m2) ● Vibration: MIL-STD-810E, Method 514.4 (0.41 Grms from 3Hz to 500Hz, 2 hours per each axis X,Y,Z)
Available Tx power settings (max/min)	2.4 GHz ● 30 dBm (1W) ● -4 dBm (0.4 mW)				5 GHz ● 30 dBm (1W) ● -4 dBm(0.4 mW)
Regulatory domains	Note: Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance For information about regulatory domain support, refer to the Cisco Regulatory Domain White Paper.
Compliance	● Safety: ◦ IEC 60950-1/IEC 60950-22 ◦ IEC 62368-1 ◦ EN 60950-1/EN 60950-22 ◦ EN 62368-1 ◦ AS/NZS 60950.1/AS/NZS 62368.1 ◦ UL 60950-1/ UL 60950-22 ◦ UL 62368-1 ◦ CAN/CSA-C22.2 No. 60950-1/ 60950-22 ◦ CAN/CSA-C22.2 No. 62368-1 ● Emissions: ◦ CISPR 32 (rev. 2015) ◦ EN 55032 (rev. 2015+A11:2020) ◦ EN61000-3-2 (rev. 2019) ◦ EN61000-3-3 (rev. 2013+A1:2019) ◦ KS C 9610-3-2:2020 ◦ KS C 9610-3-3:2020 ◦ AS/NZS CISPR 32 Class B (rev. 2015) ◦ 47 CFR FCC Part 15B ◦ ICES-003, Issue 7 ◦ VCCI-CISPR 32: 2016 ◦ CNS (rev. 13438) ◦ KS C 9832:2019 ◦ QCVN 118:2018/BTTTT ● Immunity: ◦ CISPR 24 (rev. 2010) ◦ EN 55024 + AMD 1(rev. 2010) ◦ EN 55035: 2017 ◦ QCVN (TCVN 7317:2003) ◦ KS C 9835:2019 ● Emissions and immunity: ◦ EN 301 489-1 (v2.2.3 2019-11) ◦ EN 301 489-17 (v3.2.4 2020-09) ◦ QCVN 18:2014/BTTTT ◦ QCVN 112:2017/BTTTT ◦ KS X 3124:2020 ◦ KS X 3126:2020				● Radio: ◦ EN 300 328 (v2.2.2 2019-07) ◦ EN 301 893 (v2.1.1) ◦ AS/NZS 4268 (rev. 2017) ◦ 47 CFR FCC Part 15C, 15.247, 15.407 ◦ RSP-100 ◦ RSS-GEN ◦ RSS-247 ◦ China regulations SRRC ◦ LP0002 (rev 2020) ◦ Japan Std. 33a, Std. 66, and Std. 71 ◦ QCVN (54:2020/BTTTT) ◦ QCVN (65:2013/BTTTT) ● RF safety: ◦ EN 50385 (rev. Aug 2017) ◦ ARPANSA ◦ AS/NZS 2772 (rev. 2016) ◦ 47 CFR Part 1.1310 and 2.1091 ◦ RSS-102 (2015) ● IEEE standards: ◦ IEEE 802.3 ◦ IEEE 802.3ae ◦ IEEE 802.11a/b/g/n/ac/ax/h/d/u/k/v/r ◦ IEEE 802.15.1/802.15.4 ● Multimedia: ◦ Wi-Fi Multimedia (WMM) ● Security: ◦ 802.11i, Wi-Fi Protected Access 2 (WPA2), WPA, WPA3 ◦ 802.1X/AES/TKIP ● Extensible Authentication Protocol (EAP) types: ◦ EAP-Transport Layer Security (TLS) ◦ EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol (MSCHAP) v2 ◦ Protected EAP (PEAP) v0 or EAP-MSCHAP v2 ◦ EAP-Flexible Authentication via Secure Tunneling (EAP-FAST) ◦ PEAP v1 or EAP-Generic Token Card (GTC) ◦ EAP-Subscriber Identity Module (SIM

The post Cisco C9124AXE-E Wi-Fi 6 Outdoor AP, External Ant, -E Regulatory Domain appeared first on Kurumsal E-Mağaza - Business Tech Bilişim Hizmetleri.

Cisco CW9164I-E Catalyst 9164I AP (W6E, tri-band 4×4) w/Reg-E

store-secure — Sat, 11 Jul 2026 11:39:39 +0000

Product specifications

Table 2. Specifications

Item	Specification
Part numbers	Cisco Catalyst access points ● CW9164I-x: Cisco Catalyst 9164 Series Regulatory domains: (x = regulatory domain) Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance. Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List and/or regional price lists. ● CW9164I-MR: Cisco Catalyst 9164 Series, w/Meraki Cloud-managed version using Meraki Dashboard Cisco wireless LAN services ● For details on optional WLAN services, visit Services for Wireless and Mobility
Software	Catalyst 9164 Series ● Cisco IOS XE Software Release 17.9.1 or later
Supported wireless LAN controllers	● Cisco Catalyst 9800 Series Wireless Controllers (physical or virtual)
802.11n version 2.0 (and related) capabilities	● 4×4 MIMO with four spatial streams ● Maximal Ratio Combining (MRC) ● 802.11n and 802.11a/g ● 20- and 40-MHz channels ● PHY data rates up to 1.5 Gbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) ● Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive) ● 802.11 Dynamic Frequency Selection (DFS) ● Cyclic Shift Diversity (CSD) support
802.11ac	● 4×4 downlink MU-MIMO with four spatial streams ● MRC ● 802.11ac beamforming ● 20-, 40-, 80-channels ● PHY data rates up to 1.73 Gbps (4×4 80 MHz on 5 GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● 802.11 DFS ● CSD support ● Wi-Fi Protected Access (WPA) 3 support
802.11ax	Catalyst 9164 Series ● 4×4 uplink/downlink MU-MIMO with four spatial streams (5 GHz and 6 GHz) ● 2×2 uplink/downlink MU-MIMO with two spatial streams (2.4 GHz) ● Uplink/downlink OFDMA ● TWT ● BSS coloring ● MRC ● 802.11ax beamforming ● 20-, 40-, 80-, and 160-MHz channels (6 GHz) ● 20-, 40-, 80-, channels (5 GHz) ● 20-MHz channels (2.4 GHz) ● PHY data rates up to 7.49 Gbps (4×4 160 MHz on 6 GHz, 4×4 80 MHz on 5 GHz, and 2×2 20 MHz on 2.4 GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● 802.11 DFS ● CSD support ● WPA3 support
Integrated antenna	● 2.4 GHz: Peak gain 3 dBi, internal antenna, omnidirectional in azimuth ● 5 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth ● 6 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth
Interfaces	● 1x 100M/1000M/2.5G Multigigabit Ethernet (RJ-45) ● Management console port (RJ-45) ● USB 2.0 at 4.5W
Indicators	● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
Dimensions (W x L x H)	● Access point (without mounting brackets): ◦ Catalyst 9164 Series: 9.5 x 9.5 x 2.2 in. (241.3 x 241.3 x 56.9 mm)
Weight	Catalyst 9164 Series ● 3.54 lb. (1.60 kg)
Input power requirements	● 802.3bt, Cisco Universal PoE (Cisco UPOE), 802.3at Power over Ethernet Plus (PoE+) ● Cisco power injectors: AIR-PWRINJ7=, AIR-PWRINJ6=, MA-INJ-6 ● 802.3af PoE (only for configuration staging, all radios off) ● DC power input (54V/MA-PWR-50WAC)
	Catalyst 9164
	Power Source	2.4-GHz radio		5-GHz radio	6-GHz radio (LPI)		Link speed	USB	Max PoE Power Consumption
	802.3bt (UPOE)	2×2		4×4	4×4		2.5G	Y (4.5W)	30.0W
	802.3at (PoE+)	2×2		4×4	4×4		2.5G	N	25.0W
	802.3af (PoE)	–		–	–		1G	N	14.0W
	DC power	2×2		4×4	4×4		2.5G	Y (4.5W)	30.0W
	Note: Actual power consumption may vary depending on AP usage. It is recommended that you ensure that LLDP/CDP is enabled to allow proper power negotiation.
Environmental	Catalyst 9164 Series ● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) ● Nonoperating (storage) altitude test: 25°C (77°F) at 15,000 ft (4600 m) ● Operating temperature: 32° to 122°F (0° to 50°C) ● Operating humidity: 10% to 90% (noncondensing) ● Operating altitude test: 40°C (104°F) at 9843 ft (3000 m)
System memory	● 2048 MB DRAM ● 1024 MB flash
Warranty	Limited lifetime hardware warranty (WARR-CW-LIFE-LTD)
Available transmit power settings	2.4 GHz ● 23 dBm (200 mW) ● -4 dBm (0.39 mW)		5 GHz ● 23 dBm (200 mW) ● -4 dBm (0.39 mW)			6 GHz ● 23 dBm (200 mW) ● -4 dBm (0.39 mW) Note: In countries where use of the 6-GHz band is not allowed or there is no current software support, the 6-GHz radio will be disabled. The radio may be enabled with future software, once the product is certified to operate at 6 GHz for that country.
Regulatory domains	Note: Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance. For information about regulatory domain support, refer to the Cisco Regulatory Domain White Paper.
Compliance standards	● Safety: ◦ IEC 60950-1 / IEC 62368-1 Ed.3 (with Ed.2 Deviation annex) ◦ EN 60950-1 / EN 62368-1 Ed.3 (with Ed.2 Deviation annex) ◦ UL 60950-1 / UL62368-1 3^rd (with Ed.2 Deviation annex) ◦ CAN/CSA-C22.2 No. 60950-1 / CAN/CSA-C22.2 No. 62368-1 3^rd (with Ed.2 Deviation annex) ◦ AS/NZS60950.1 / AS/NZS62368.1 Ed.3 (with Ed.2 Deviation annex) ◦ UL 2043 ◦ Class III equipment ● Emissions: ◦ CISPR 32 (rev. 2015) +AMD1:2019 ◦ EN 55032:2015/A11:2020 ◦ EN IEC 61000-3-2:2019/A1:2021 ◦ EN61000-3-3:2013+A1:2019 ◦ AS/NZS CISPR32: 2015+AMD1:2020 ◦ 47 CFR FCC Part 15B ◦ ICES-003 (Issue 7, Class B) ◦ VCCI-CISPR 32:2016 ◦ CNS 13438:2006 (95) ◦ KS C 9832:2019 ● Immunity: ◦ EN 55035: 2017+A11:2020 ◦ KS C 9835:2019 ● Emissions and immunity: ◦ EN 301 489-1 V2.2.3 (2019-11) ◦ EN 301 489-17 V3.2.4 (2020-09) ◦ QCVN 112:2017/BTTTT ◦ KS X 3124:2020 ◦ KS X 3126:2020 ◦ EN 61000-6-1: 2019					● Radio: ● EN 300 328 (v2.2.2) ● EN 301 893 (v2.1.1) ● EN 303 687 (v0.0.14, draft) ● AS/NZS 4268 (rev. 2017) ● 47 CFR FCC Part 15C, 15.247, 15.407 ● RSP-100 ● RSS-GEN ● RSS-247 ● LP002 ● Japan Std. 66, and Std. 71 ● RF safety: ● EN 50385:2017 ● EN 62311:2020 ● AS/NZS 2772.2 (rev. 2016) ● 47 CFR Part 2.1091 ● RSS-102 ● IEEE standards: ● IEEE 802.3 ● IEEE 802.3ab ● IEEE 802.3af/at/bt ● IEEE 802.11a/b/g/n/ac/ax ● IEEE 802.11h, 802.11d ● Security: ◦ WPA2-Personal (802.11i) ◦ WPA2-Enterprise with 802.1X ◦ WPA3-Personal, WPA3-Enterprise ◦ WPA3-Enhanced Open (OWE) ◦ Advanced Encryption Standard (AES) ● Extensible Authentication Protocol (EAP) types: ● EAP-Transport Layer Security (TLS) ● EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol (MSCHAP) v2 ● Protected EAP (PEAP) v0 or EAP-MSCHAP v2 ● EAP-Flexible Authentication via Secure Tunneling (EAP-FAST) ● PEAP v1 or EAP-Generic Token Card (GTC) ● EAP-Subscriber Identity Module (SIM)
Certifications	● Wi-Fi Alliance: Wi-Fi 6 (R2), Wi-Fi 6E, WPA3-R3, WPA3-Suite B, Enhanced Open Security ● Bluetooth SIG: Bluetooth Low Energy

The post Cisco CW9164I-E Catalyst 9164I AP (W6E, tri-band 4×4) w/Reg-E appeared first on Kurumsal E-Mağaza - Business Tech Bilişim Hizmetleri.

Cisco CW9166I-E Catalyst 9166I AP (W6E, tri-band 4×4, XOR) w/Reg-E

store-secure — Sat, 11 Jul 2026 11:39:39 +0000

Product specifications

Table 2. Specifications

Item	Specification
Part numbers	Cisco Catalyst access points ● CW9166I-x: Cisco Catalyst 9166 Series with integrated, omni-directional antennas ● CW9166D1-x: Cisco Catalyst 9166 Series with integrated, directional antennas Regulatory domains: (x = regulatory domain) Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance. Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List and/or regional price lists. ● CW9166I-MR: Cisco Catalyst 9166 Series, w/Meraki ● CW9166D1-MR: Cisco Catalyst 9166 Series, w/Meraki Cloud-managed version using Meraki Dashboard Cisco wireless LAN services ● For details on optional WLAN Services, visit Services for Wireless and Mobility
Software	Catalyst 9166I ● Cisco IOS ^® XE Software Release 17.9.1 or later Catalyst 9166D1 ● Cisco IOS® XE Software Release 17.12.1 or later
Supported wireless LAN controllers	● Cisco Catalyst 9800 Series Wireless Controllers (physical or virtual) ● Cisco Catalyst 9000 switches with Embedded Wireless Controller in SDA mode
802.11n version 2.0 (and related) capabilities	● 4×4 MIMO with four spatial streams ● Maximal Ratio Combining (MRC) ● 802.11n and 802.11a/g ● 20- and 40-MHz channels ● PHY data rates up to 1.5 Gbps (40 MHz with 5GHz and 20 MHz with 2.4GHz) ● Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive) ● 802.11 Dynamic Frequency Selection (DFS) ● Cyclic Shift Diversity (CSD) support
802.11ac	● 4×4 downlink MU-MIMO with four spatial streams ● MRC ● 802.11ac beamforming ● 20-, 40-, 80-, and 160-MHz channels ● PHY data rates up to 3.4 Gbps (Dual 4×4 80+80 MHz on 5GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● 802.11 DFS ● CSD support ● Wi-Fi Protected Access (WPA) 3 support
802.11ax	● 1024 QAM ● 4×4 uplink/downlink MU-MIMO with four spatial streams (2.4GHz, 5GHz and 6GHz) ● Uplink/downlink OFDMA ● TWT ● BSS coloring ● MRC ● 802.11ax beamforming ● 20-, 40-, 80-, and 160-MHz channels (6GHz) ● 20-, 40-, 80-, and 80+80-MHz channels (5GHz) ● 20-MHz channels (2.4GHz) ● PHY data rates up to 7.78 Gbps (4×4 160 MHz on 6GHz, 4×4 80 MHz on 5GHz, and 4×4 20 MHz on 2.4GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● 802.11 DFS ● CSD support ● WPA3 support
Antennas	Catalyst 9166I ● 2.4GHz: Peak gain 3 dBi, internal antenna, omnidirectional in azimuth ● 5GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth ● 5GHz (XOR): Peak gain 5 dBi, internal antenna, omnidirectional in azimuth ● 6GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth Catalyst 9166D1 ● 2.4GHz: Peak gain 6 dBi, directional antenna, (70×70) ● 5GHz: Peak gain 6 dBi, directional antenna, (70×70) ● 5GHz (XOR): Peak gain 8 dBi, directional antenna, (60×60) ● 6GHz: Peak gain 8 dBi, directional antenna, (60×60)
Interfaces	● Catalyst 9166 Series: 1x 100M/1000M/2.5G/5G Multigigabit Ethernet (RJ-45) ● Management console port (RJ-45) ● USB 2.0 at 4.5W
Indicators	● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
Dimensions (W x L x H)	● Access point (without mounting brackets): ◦ Catalyst 9166I: 9.5 x 9.5 x 2.2 in. (241.3 x 241.3 x 56.9 mm) ◦ Catalyst 9166D1: 9.5 x 9.5 x 2.28 in (241.3 x 241.3 x 57.9 mm)
Weight	Catalyst 9166I Series ● 3.54 lb (1.60 kg) Catalyst 9166D1 ● 3.50 lb (1.59 kg)
Input power requirements	● 802.3bt, Cisco Universal PoE (Cisco UPOE), 802.3at Power over Ethernet Plus (PoE+) ● Cisco power injectors: AIR-PWRINJ7=, AIR-PWRINJ6=, MA-INJ-6 ● 802.3af PoE (only for configuration staging, all radios off) ● DC power input (54V/MA-PWR-50WAC)
	Catalyst 9166
	Power Source	2.4GHz radio	5GHz radio		6GHz radio (LPI)		Link speed		USB	Max PoE Power Consumption
	802.3bt (UPOE)	4×4	4×4		4×4		5 Gbps		Y (4.5W)	30.5.W
	802.3at (PoE+)	4×4	4×4		4×4		5 Gbps		N	25.5 W
	802.3af (PoE)	–	–		–		1Gbps		N	14.0 W
	DC power	4×4	4×4		4×4		5Gbps		Y(4.5W)	–
	Catalyst 9166D1
	802.3bt (UPOE)	4×4	4×4		4×4		5 Gbps		Y (4.5W)	30.5.W
	802.3at (PoE+)	4×4	4×4		4×4		5 Gbps		N	25.5 W
	802.3af (PoE)	–	–		–		1Gbps		N	14.0 W
	DC power	4×4	4×4		4×4		5Gbps		Y(4.5W)	–
	Note: Actual power consumption may vary depending on AP usage. It is recommended that you ensure that LLDP/CDP is enabled to allow proper power negotiation.
Environmental	Catalyst 9166 Series ● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) ● Nonoperating (storage) altitude test: 25°C (77°F) at 15,000 ft (4600 m) ● Operating temperature: 32° to 122°F (0° to 50°C) ● Operating humidity: 10% to 90% (noncondensing) ● Operating altitude test: 40°C (104°F) at 9843 ft (3000 m) Catalyst 9166D1 Series ● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) ● Nonoperating (storage) altitude test: 25°C (77°F) at 15,000 ft (4600 m) ● Operating temperature: -4° to 122°F (-20° to 50°C) ● Operating humidity: 10% to 90% (noncondensing) ● Operating altitude test: 40°C (104°F) at 9843 ft (3000 m)
System memory	● 2048 MB DRAM ● 1024 MB flash
Warranty	Limited lifetime hardware warranty (WARR-CW-LIFE-LTD)
Available transmit power settings	2.4GHz ● 23 dBm (200 mW) ● -4 dBm (0.39 mW)			5GHz ● 23 dBm (200 mW) ● -4 dBm (0.39 mW)				6GHz ● 23 dBm (200 mW) ● -4 dBm (0.39 mW) Note: In countries where use of the 6GHz band is not allowed or authorized or if there is no current software support, the 6GHz radio will be disabled and will switch to a 5GHz and operate as a dual 5GHz access point. The 6GHz radio may be enabled with future software, once the product is certified to operate at 6GHz for that country. Numbers above are Low Power Indoor (LPI).
Regulatory domains	Note: Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance.
Compliance standards	● Safety: ◦ IEC 60950-1 / IEC 62368-1 Ed.3 (with Ed.2 Deviation annex) ◦ EN 60950-1 / EN 62368-1 Ed.3 (with Ed.2 Deviation annex) ◦ UL 60950-1 / UL62368-1 3^rd (with Ed.2 Deviation annex) ◦ CAN/CSA-C22.2 No. 60950-1 / CAN/CSAC22.2 No. 62368-1 3^rd (with Ed.2 Deviation annex) ◦ AS/NZS60950.1 / AS/NZS62368.1 Ed.3 (with Ed.2 Deviation annex) ◦ UL 2043 ◦ Class III equipment ● Emissions: ◦ CISPR 32 (rev. 2015) +AMD1:2019 ◦ EN 55032:2015/A11:2020 ◦ EN IEC 61000-3-2:2019/A1:2021 ◦ EN61000-3-3:2013+A1:2019 ◦ AS/NZS CISPR32: 2015+AMD1:2020 ◦ 47 CFR FCC Part 15B ◦ ICES-003 (Issue 7, Class B) ◦ VCCI-CISPR 32:2016 ◦ CNS 13438:2006 (95) ◦ KS C 9832:2019 ● Immunity: ◦ EN 55035: 2017+A11:2020 ◦ KS C 9835:2019 ◦ Emissions and immunity: ◦ EN 301 489-1 V2.2.3 (2019-11) ◦ EN 301 489-17 V3.2.4 (2020-09) ◦ QCVN 112:2017/BTTTT ◦ KS X 3124:2020 ◦ KS X 3126:2020 ◦ EN 61000-6-1: 2019					● Radio: ◦ EN 300 328 (v2.2.2) ◦ EN 301 893 (v2.1.1) ◦ EN 303 687 (v0.0.14, draft) ◦ AS/NZS 4268 (rev. 2017) ◦ 47 CFR FCC Part 15C, 15.247, 15.407 ◦ RSP-100 ◦ RSS-GEN ◦ RSS-247 ◦ LP002 ◦ Japan Std. 66, and Std. 71 ● RF safety: ◦ EN 50385:2017 ◦ EN 62311:2020 ◦ AS/NZS 2772.2 (rev. 2016) ◦ 47 CFR Part 2.1091 ◦ RSS-102 ● IEEE standards: ◦ IEEE 802.3 ◦ IEEE 802.3ab ◦ IEEE 802.3af/at/bt ◦ IEEE 802.11a/b/g/n/ac/ax ◦ IEEE 802.11h, 802.11d ● Security ◦ WPA2-Personal (802.11i) ◦ WPA2-Enterprise with 802.1X ◦ WPA3-Personal, WPA3-Enterprise ◦ WPA3-Enhanced Open (OWE) ◦ Advanced Encryption Standard (AES) ● Extensible Authentication Protocol (EAP) types: ◦ EAP-Transport Layer Security (TLS) ◦ EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol (MSCHAP) v2 ◦ Protected EAP (PEAP) v0 or EAP-MSCHAP v2 ◦ EAP-Flexible Authentication via Secure Tunneling (EAP-FAST) ◦ PEAP v1 or EAP-Generic Token Card (GTC) ◦ EAP-Subscriber Identity Module (SIM)
Certifications	● Wi-Fi Alliance: Wi-Fi 6 (R2), Wi-Fi 6E, WPA3-R3, WPA3-Suite B, Enhanced Open Security ● Bluetooth SIG: Bluetooth Low Energy (BLE)

The post Cisco CW9166I-E Catalyst 9166I AP (W6E, tri-band 4×4, XOR) w/Reg-E appeared first on Kurumsal E-Mağaza - Business Tech Bilişim Hizmetleri.

Cisco MA-SFP-1GB-SX Meraki 1000Base SX Multi-Mode

store-secure — Wed, 24 Jun 2026 14:28:07 +0000

Product Dimensions	2.3 x 0.6 x 0.4 inches
Item Weight	0.6 ounces
Manufacturer	fiber mall

Item model number	MA-SFP-1GB-SX

The post Cisco MA-SFP-1GB-SX Meraki 1000Base SX Multi-Mode appeared first on Kurumsal E-Mağaza - Business Tech Bilişim Hizmetleri.

Cisco MR46-HW Meraki MR46 Wi-Fi 6 Indoor AP

store-secure — Wed, 24 Jun 2026 14:28:07 +0000

Radios

2.4 GHz 802.11b/g/n/ax client access radio
5 GHz 802.11a/n/ac/ax client access radio
2.4 GHz & 5 GHz dual-band WIDS/WIPS, spectrum analysis, & location analytics radio
2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support
Concurrent operation of all four radios
Supported frequency bands (country-specific restrictions apply):
- 2.412-2.484 GHz
- 5.150-5.250 GHz (UNII-1)
- 5.250-5.350 GHZ (UNII-2)
- 5.470-5.600, 5.660-5.725 GHz (UNII-2e)
- 5.725 -5.825 GHz (UNII-3)

Antenna

Internal Antenna (5.4 dBi gain at 2.4 GHz, 6 dBi gain at 5 GHz)

802.11ax, 802.11ac Wave 2 and 802.11n Capabilities

DL-OFDMA, UL-OFDMA, TWT support, BSS Coloring
4 x 4 multiple input, multiple output (MIMO) with four spatial streams
SU-MIMO, UL MU-MIMO and DL MU-MIMO support
Maximal ratio combining (MRC) & beamforming
20 and 40 MHz channels (802.11n); 20, 40, and 80 MHz channels (802.11ac Wave 2); 20, 40 and 80 MHz channels (802.11ax)
Up to 1024-QAM on both 2.4 GHz & 5 GHz bands
Packet aggregation

Power

Power over Ethernet: 42.5 – 57 V (802.at compliant)
Alternative: 12 V DC input
Power consumption: 18W max (802.3at)
Power over Ethernet injector and DC adapter (sold separately – see accessories tab)

Interfaces

1 x 1000/2.5G BASE-T Ethernet (RJ45)
1 x DC power connector (5.5 mm x 2.5 mm, centre positive)

Mounting

All standard mounting hardware included
Desktop, ceiling, and wall mount capable
Ceiling tile rail (9/16, 15/16 or 1 1/2” flush or recessed rails), assorted cable junction boxes
Bubble level on mounting cradle for accurate horizontal wall mounting

Physical Security

Two security screw options (included) (13.5 mm long and 2.5 mm diameter and 5 mm head)
Kensington lock hard point
Concealed mount plate with anti-tamper cable bay

Environment

Operating temperature: 0ºC to 40ºC (32ºF to 104ºF)
Humidity: 5% to 95% non-condensing

Physical Dimensions

30.6 x 12.84 x 4.426 cm (12.05 x 5.06 x 1.74 in.)
- Not including desk mount feet or mount plate
Weight: 800 g

Security

Integrated Layer 7 firewall with mobile device policy management
Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
Flexible guest access with device isolation
VLAN tagging (802.1q) and tunneling with IPsec VPN
PCI compliance reporting
WEP, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 – Personal, WPA3 – Enterprise, WPA3 – Enhanced Open (OWE)
EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
TKIP and AES encryption
Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration
Cisco ISE integration for Guest access and BYOD Posturing

Quality of Service

Advanced Power Save (U-APSD)
WMM Access Categories with DSCP and 802.1p support
Layer 7 application traffic identification and shaping

Mobility

PMK, OKC, & 802.11r for fast Layer 2 roaming
Distributed or centralised layer 3 roaming

Analytics

Embedded location analytics reporting and device tracking
Global L7 traffic analytics reporting per network, per device, & per application

LED Indicators

1 x Power/booting/firmware upgrade status

Regulatory

RoHS

Compliance and Standards

IEEE Standards

802.11a, 802.11ac, 802.11ax, 802.11b, 802.11e, 802.11g, 802.11h, 802.11i, 802.11k, 802.11n, 802.11r, and 802.11u

Safety Approvals

CSA and CB 60950 & 62368
Conforms to UL 2043 (Plenum Rating)

Radio Approvals

Canada: FCC Part 15C, 15E, RSS-247
Europe: EN 300 328, EN 301 893
Australia/NZ: AS/NZS 4268
Mexico: IFT, NOM-208
Taiwan: NCC LP0002

EMI Approvals (Class B)

Canada: FCC Part 15B, ICES-003
Europe: EN 301 489-1-17, EN 55032, EN 55024
Australia/NZ: CISPR 22
Japan: VCCI

Exposure Approvals

Canada: FCC Part 2, RSS-102
Europe: EN 50385, EN 62311, EN 62479
Australia/NZ: AS/NZS 2772

Package Contents

1 x Meraki MR46 access point
1 x Mount cradle including built-in level tool
1 x Drop ceiling mount kit
1 x Set of wall screws, wall screw anchors, and security screws

The post Cisco MR46-HW Meraki MR46 Wi-Fi 6 Indoor AP appeared first on Kurumsal E-Mağaza - Business Tech Bilişim Hizmetleri.