Cisco MR46-HW Meraki MR46 Wi-Fi 6 Indoor AP

Radios

• 2.4 GHz 802.11b/g/n/ax client access radio
• 5 GHz 802.11a/n/ac/ax client access radio
• 2.4 GHz & 5 GHz dual-band WIDS/WIPS, spectrum analysis, & location analytics radio
• 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support
• Concurrent operation of all four radios
• Supported frequency bands (country-specific restrictions apply):
  • 2.412-2.484 GHz
  • 5.150-5.250 GHz (UNII-1)
  • 5.250-5.350 GHZ (UNII-2)
  • 5.470-5.600, 5.660-5.725 GHz (UNII-2e)
  • 5.725 -5.825 GHz (UNII-3)

Antenna

• Internal Antenna (5.4 dBi gain at 2.4 GHz, 6 dBi gain at 5 GHz)

802.11ax, 802.11ac Wave 2 and 802.11n Capabilities

• DL-OFDMA, UL-OFDMA, TWT support, BSS Coloring
• 4 x 4 multiple input, multiple output (MIMO) with four spatial streams
• SU-MIMO, UL MU-MIMO and DL MU-MIMO support
• Maximal ratio combining (MRC) & beamforming
• 20 and 40 MHz channels (802.11n); 20, 40, and 80 MHz channels (802.11ac Wave 2); 20, 40 and 80 MHz channels (802.11ax)
• Up to 1024-QAM on both 2.4 GHz & 5 GHz bands
• Packet aggregation

Power

• Power over Ethernet: 42.5 – 57 V (802.at compliant)
• Alternative: 12 V DC input
• Power consumption: 18W max (802.3at)
• Power over Ethernet injector and DC adapter (sold separately – see accessories tab)

Interfaces

• 1 x 1000/2.5G BASE-T Ethernet (RJ45)
• 1 x DC power connector (5.5 mm x 2.5 mm, centre positive)

Mounting

• All standard mounting hardware included
• Desktop, ceiling, and wall mount capable
• Ceiling tile rail (9/16, 15/16 or 1 1/2” flush or recessed rails), assorted cable junction boxes
• Bubble level on mounting cradle for accurate horizontal wall mounting

Physical Security

• Two security screw options (included) (13.5 mm long and 2.5 mm diameter and 5 mm head)
• Kensington lock hard point
• Concealed mount plate with anti-tamper cable bay

Environment

• Operating temperature: 0ºC to 40ºC (32ºF to 104ºF)
• Humidity: 5% to 95% non-condensing

Physical Dimensions

• 30.6 x 12.84 x 4.426 cm (12.05 x 5.06 x 1.74 in.)
  • Not including desk mount feet or mount plate
• Weight: 800 g

Security

• Integrated Layer 7 firewall with mobile device policy management
• Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
• Flexible guest access with device isolation
• VLAN tagging (802.1q) and tunneling with IPsec VPN
• PCI compliance reporting
• WEP, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 – Personal, WPA3 – Enterprise, WPA3 – Enhanced Open (OWE)
• EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
• TKIP and AES encryption
• Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration
• Cisco ISE integration for Guest access and BYOD Posturing

Quality of Service

• Advanced Power Save (U-APSD)
• WMM Access Categories with DSCP and 802.1p support
• Layer 7 application traffic identification and shaping

Mobility

• PMK, OKC, & 802.11r for fast Layer 2 roaming
• Distributed or centralised layer 3 roaming

Analytics

• Embedded location analytics reporting and device tracking
• Global L7 traffic analytics reporting per network, per device, & per application

LED Indicators

• 1 x Power/booting/firmware upgrade status

Regulatory

• RoHS

Compliance and Standards

IEEE Standards

• 802.11a, 802.11ac, 802.11ax, 802.11b, 802.11e, 802.11g, 802.11h, 802.11i, 802.11k, 802.11n, 802.11r, and 802.11u

Safety Approvals

• CSA and CB 60950 & 62368
• Conforms to UL 2043 (Plenum Rating)

Radio Approvals

• Canada: FCC Part 15C, 15E, RSS-247
• Europe: EN 300 328, EN 301 893
• Australia/NZ: AS/NZS 4268
• Mexico: IFT, NOM-208
• Taiwan: NCC LP0002

EMI Approvals (Class B)

• Canada: FCC Part 15B, ICES-003
• Europe: EN 301 489-1-17, EN 55032, EN 55024
• Australia/NZ: CISPR 22
• Japan: VCCI

Exposure Approvals

• Canada: FCC Part 2, RSS-102
• Europe: EN 50385, EN 62311, EN 62479
• Australia/NZ: AS/NZS 2772

Package Contents

• 1 x Meraki MR46 access point
• 1 x Mount cradle including built-in level tool
• 1 x Drop ceiling mount kit
• 1 x Set of wall screws, wall screw anchors, and security screws