Cisco C9124AXE-E Wi-Fi 6 Outdoor AP, External Ant, -E Regulatory Domain

●  C9124AXI-x: Cisco Catalyst 9124AX Series (internal omnidirectional antenna)

●  C9124AXI-EWC-X: Cisco Catalyst 9124AX Series Access point with Embedded wireless controller (internal omnidirectional antenna)

●  C9124AXD-x: Cisco Catalyst 9124AX Series (internal directional antenna)

●  C9124AXD-EWC-X: Cisco Catalyst 9124AX Series Access point with Embedded wireless controller (internal directional antenna)

●  C9124AXE-x: Cisco Catalyst 9124AX Series (External antenna)

●  C9124AXE-EWC-X: Cisco Catalyst 9124AX Series Access point with Embedded wireless controller (External Antenna)

Regulatory domains: (x = regulatory domain)

Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance.

Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List and/or regional price lists.

Cisco Wireless LAN Services

●  AS-WLAN-CNSLT: Cisco Wireless LAN Network Planning and Design Service

●  AS-WLAN-CNSLT: Cisco Wireless LAN 802.11n Migration Service

●  AS-WLAN-CNSLT: Cisco Wireless LAN Performance and Security Assessment Service

●  Cisco IOS XE Software Release 17.5.1/17.3.4 (B Domain) or later

●  Cisco IOS XE Software Release 17.6.2 or later (For all Regulatory Domains)

Catalyst C9124AXE

●  Cisco IOS XE Software Release 17.6.2 or later

Catalyst C9124AXI/C9124AXD Embedded wireless Controller

●  Cisco IOS XE Software Release 17.6.2 or later

●  4×4:4 in both 2.4GHz and 5 GHz uplink/downlink MU-MIMO with four spatial streams

C9124AXE

●  4×4:4 in 2.4GHz + two 2×2:2 radios in 5 GHz uplink/downlink MU-MIMO

●  Maximal Ratio Combining (MRC)

●  802.11n and 802.11a/g

●  20- and 40-MHz channels

●  PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)

●  Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)

●  802.11 Dynamic Frequency Selection (DFS)

●  Cyclic Shift Diversity (CSD) support

●  4×4:4 in both 2.4GHz and 5 GHz uplink/downlink MU-MIMO with four spatial streams

C9124AXE

●  4×4:4 in 2.4GHz + two 2×2:2 radios in 5 GHz uplink/downlink MU-MIMO

●  MRC

●  802.11ac beamforming

●  20-, 40-, 80- and 80+80-MHz channels

●  PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz)

●  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)

●  802.11 DFS

●  CSD support

●  WPA3 support

●  4×4:4 in both 2.4GHz and 5 GHz uplink/downlink MU-MIMO with four spatial streams

C9124AXE

●  4×4:4 in 2.4GHz + two 2×2:2 radios in 5 GHz uplink/downlink MU-MIMO Uplink/downlink OFDMA

●  TWT

●  BSS coloring

●  MRC

●  802.11ax beamforming

●  20-, 40-, 80-, and 80+80-MHz channels

●  PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz)

●  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)

●  802.11 DFS

●  CSD support

●  WPA3 support

●  WPA3-Enterprise 192 support

●  2.4 GHz: Peak gain 7 dBi, internal antenna, Vertical Polarization, omnidirectional

●  5 GHz: Peak gain 7 dBi, internal antenna, Vertical Polarization, omnidirectional

●  BLE Antenna Gain: 5 dBi, internal antenna, Vertical Polarization, omnidirectional

Catalyst 9124AXD

●  2.4 GHz: Peak gain 9 dBi, internal antenna, Dual Polarization, directional, Azimuth beamwidth 70 deg, elevation beamwidth 65 deg

●  5 GHz: Peak gain 9 dBi, internal antenna, Dual Polarization, directional, Azimuth beamwidth 55 deg, elevation beamwidth 50 deg

●  BLE Antenna Gain: 4 dBi, internal antenna, Vertical Polarization, omnidirectional

●  For more details, see Catalyst 9124AX Series Getting Started Guide.

●  The Catalyst 9124AXE Access Point is certified for use with antenna gains up to 13 dBi (2.4 GHz and 5GHz)

●  Cisco offers the industry’s broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios.

●  Supports Self-Identifiable Antennas (SIA)

For more details, see Catalyst 9124AX Series Getting Started Guide.

●  1x 100/1000/2500 BASE-T (Ethernet) uplink interface

●  1x Gigabit Ethernet SFP

●  Supports PoE output (802.3af compliant PSE) on the 1x 10/100/1000 BASE-T (Ethernet) downlink interface if C9124AX powered from one of the following:

◦    UPOE or 802.3bt inline power source (Switch or Power Injector)

◦    DC input (with external power supply rated ³ 60W)

●  Management console port (RJ-45)

◦    9124AXI, 9124AXD, 9124AXE: 10.2 x 9.2 x 3.2 in. (25.9 x 23.3 x 8.1 cm)

●  6.5 lb. (2.9 kg)

9124AXE

●  7 lb. (3.1 kg)

●  Cisco power injector, AIR-PWRINJ-60RGD1= and AIR-PWRINJ-60RGD2=

●  Cisco power injector, AIR-PWRINJ6= (Note: This injector supports 802.3at)

●  DC power source: Auxiliary DC input, 24V to 56V

●  Nonoperating (storage) temperature: -40° to 185°F (-40° to 85°C)

●  Nonoperating altitude test: 17,000 ft (5182 m)

●  Operating temperature: -40° to 149°F (-40° to 65°C) with no solar loading, -40° to 131°F (-40° to 55°C) with solar loading

●  Operating altitude test: 17,000 ft (5182 m)

●  Operating humidity: 0% to 100% (condensing)

●  IEC 60529 Ingress Rating: IP66/IP67

●  Wind resistance up to 100 mph (161 km/h) sustained winds and 165 mph (266 km/h) wind gusts

●  Icing protection: MIL-STD-810F,13mm 13mm (0.5 in.)

●  Corrosion: NEMA 250-2008 (600 hrs. salt, 1200 hrs. mixed gas)

●  Solar radiation: EN 60068-2-5 (1120 W/m2)

●  Vibration: MIL-STD-810E, Method 514.4 (0.41 Grms from 3Hz to 500Hz, 2 hours per each axis X,Y,Z)

●  30 dBm (1W)

●  -4 dBm (0.4 mW)

●  30 dBm (1W)

●  -4 dBm(0.4 mW)

For information about regulatory domain support, refer to the Cisco Regulatory Domain White Paper.

◦    IEC 60950-1/IEC 60950-22

◦    IEC 62368-1

◦    EN 60950-1/EN 60950-22

◦    EN 62368-1

◦    AS/NZS 60950.1/AS/NZS 62368.1

◦    UL 60950-1/ UL 60950-22

◦    UL 62368-1

◦    CAN/CSA-C22.2 No. 60950-1/ 60950-22

◦    CAN/CSA-C22.2 No. 62368-1

●  Emissions:

◦    CISPR 32 (rev. 2015)

◦    EN 55032 (rev. 2015+A11:2020)

◦    EN61000-3-2 (rev. 2019)

◦    EN61000-3-3 (rev. 2013+A1:2019)

◦    KS C 9610-3-2:2020

◦    KS C 9610-3-3:2020

◦    AS/NZS CISPR 32 Class B (rev. 2015)

◦    47 CFR FCC Part 15B

◦    ICES-003, Issue 7

◦    VCCI-CISPR 32: 2016

◦    CNS (rev. 13438)

◦    KS C 9832:2019

◦    QCVN 118:2018/BTTTT

●  Immunity:

◦    CISPR 24 (rev. 2010)

◦    EN 55024 + AMD 1(rev. 2010)

◦    EN 55035: 2017

◦    QCVN (TCVN 7317:2003)

◦    KS C 9835:2019

●  Emissions and immunity:

◦    EN 301 489-1 (v2.2.3 2019-11)

◦    EN 301 489-17 (v3.2.4 2020-09)

◦    QCVN 18:2014/BTTTT

◦    QCVN 112:2017/BTTTT

◦    KS X 3124:2020

◦    KS X 3126:2020

◦    EN 300 328 (v2.2.2 2019-07)

◦    EN 301 893 (v2.1.1)

◦    AS/NZS 4268 (rev. 2017)

◦    47 CFR FCC Part 15C, 15.247, 15.407

◦    RSP-100

◦    RSS-GEN

◦    RSS-247

◦    China regulations SRRC

◦    LP0002 (rev 2020)

◦    Japan Std. 33a, Std. 66, and Std. 71

◦    QCVN (54:2020/BTTTT)

◦    QCVN (65:2013/BTTTT)

●  RF safety:

◦    EN 50385 (rev. Aug 2017)

◦    ARPANSA

◦    AS/NZS 2772 (rev. 2016)

◦    47 CFR Part 1.1310 and 2.1091

◦    RSS-102 (2015)

●  IEEE standards:

◦    IEEE 802.3

◦    IEEE 802.3ae

◦    IEEE 802.11a/b/g/n/ac/ax/h/d/u/k/v/r

◦    IEEE 802.15.1/802.15.4

●  Multimedia:

◦    Wi-Fi Multimedia (WMM)

●  Security:

◦    802.11i, Wi-Fi Protected Access 2 (WPA2), WPA, WPA3

◦    802.1X/AES/TKIP

●  Extensible Authentication Protocol (EAP) types:

◦    EAP-Transport Layer Security (TLS)

◦    EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol (MSCHAP) v2

◦    Protected EAP (PEAP) v0 or EAP-MSCHAP v2

◦    EAP-Flexible Authentication via Secure Tunneling (EAP-FAST)

◦    PEAP v1 or EAP-Generic Token Card (GTC)

◦    EAP-Subscriber Identity Module (SIM